Note: Ingredients listed on restricted chemical lists
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
N/A
EC/CAS
162881-26-7
Name of the chemical
Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Concentration
N/A
General Information
Revision date
2019-10-08
Product name
Non Wipe Gel Top Coat and Matte Top Coat
1.2.1 Relevant identified uses
Directions for use: Apply one coat to finished nail and cure for 30 – 60 seconds
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Valentino Beauty Pure, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
support@valentinobeautypure.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H320
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H320
Causes eye irritation
Section 2
2.1 Classification of the substance or mixture
Skin Sens. 1 H317 May cause an allergic skin reaction. Eye Irrit. 2B H320 Causes eye irritation.
Hazardous Ingredients
2-hydroxyethyl methacrylate phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Hazard statements
H320 Causes eye irritation. H317 May cause an allergic skin reaction.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash thoroughly after handling. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves. P302+P352 If on skin: Wash with plenty of water. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P321 Specific treatment (see supplementary first aid instructions on this Safety Data Sheet). P337+P313 If eye irritation persists: Get medical advice/attention. P363 Wash contaminated clothing before reuse. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. · Unknown acute toxicity: This value refers to knowledge of known, established toxicological or ecotoxicological values. 0 % of the mixture consists of component(s) of unknown toxicity.
Classification system
NFPA/HMIS Definitions 0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme · NFPA ratings (scale 0 - 4) Health = 1 1 Fire = 1 1 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH 1 Health = 1 FIRE 1 Fire = 1 REACTIVITY 0 Physical Hazard = 0
2.3 Other hazards
None known