Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
7440-36-0
Name of the chemical
Antimony
Concentration
N/A
EC/CAS
231-111-4
Name of the chemical
Nickel, Metall (790/2009)
Concentration
N/A
EC/CAS
231-176-9
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
231-146-5
Name of the chemical
Antimony and its compounds
Concentration
N/A
General Information
Revision date
2021-12-02
Product name
Thermoelectric Material - VACOTHERM
Icons in SDS
Company Information
company name
VACUUMSCHMELZE GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
datasheet@vacuumschmelze.com
Section 2
CLP CLASSIFICATION
CLP-Regulation) Not applicable For articles there is no obligation to classify acc. to CLP -Regulation. • 2.2 Labelling according to Regulation (EC) No 1272/2008 Labelling according to Regulation (EC) No 1272/2008 (CLP-Regulation): Not applicable • Additional VAC information: In the case of dust-producing processing, we recommend observance of the following warnings : The hazard statements result from the ingredients (composition) of the alloy and the applied nickel coating.
Hazard statements
May cause an allergic skin reaction. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure.
Precautionary statements
Do not breathe dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. IF exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
Dry mechanical processing is only permitted under special safety precautions because dusts which are capable of self-heating or pyrophorous dusts with a tendency to explode may be produced. In the case of wet mechanical processing: The resulting processing sludges must be kept under a protective liquid because drying out sludges are capable of self-heating or may react pyrophorously.
PBT Substances
Not applicable
vPvB Substances
Not applicable *
