Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-48-4
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
N/A
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
231-158-0
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
N/A
EC/CAS
231-111-4
Name of the chemical
Nickel, Metall (790/2009)
Concentration
N/A
General Information
Revision date
2012-03-13
Product name
Permanent-Magnet, nickeled
1.2.1 Relevant identified uses
PERMANENT MAGNETS e.g. in motors, generators, sensors, E-Mobility
Icons in SDS
Company Information
company name
VACUUMSCHMELZE GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
datasheet@vacuumschmelze.com
Section 2
CLP CLASSIFICATION
CLP-Regulation) Not applicable Our semi-finished and finished products constitute manufactured articles under the terms of the REACH Regulation (EC) No. 1907/2006. For articles there is no obligation to classify acc. to CLP -Regulation.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 (CLP-Regulation): Not applicable - • Additional VAC information: In the case of dust-producing processing, we recommend observance of the following warnings : The hazard statements result from the ingredients (composition) of the permant magnets and the applied coating.
Hazard statements
See also 'Other hazards' Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life.
Precautionary statements
Do not breathe dust/fume/gas/mist/vapours/spray. In case of inadequate ventilation wear respiratory protection. Use personal protective equipment as required. Avoid release to the environment. IF exposed or concerned: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention.
2.3 Other hazards
Dry mechanical processing of rare earth permanent magnet alloys is only permitted under special safety precautions because dusts which are capable of self-heating or pyrophorous dusts with a tendency to explode may be produced. In the case of wet mechanical processing the watery processing medium reacts with the magnet wear and may form hydrogen already at room temperature. Attention: Formation of Ex-atmospheres possible! Part of the resulting hydrogen is stored in the material. The resulting processing sludges must be kept under a protective liquid because drying out sludges are capable of self-heating or may react pyrophorously. In this case the stored hydrogen volume burns off with flames. Attention: Magnetized parts generate magnetic fields and are able to attract magnetizable materials. This may result in injury during handling of magnets. Electronic devices and measuring tools may be changed in calibration or damaged by the high magnetic field strength. Please keep magnetized magnets away from computers, displays and magnetic storage devices. Especially people with heart pacemakers must keep away from magnetic fields.
PBT Substances
Not applicable
vPvB Substances
Not applicable