Permanent magnet, double coated nickel + gold

CLP CLASSIFICATION

CLP-Regulation) Not applicable Our semi-finished and finished products constitute manufactured articles under the terms of the REACH Regulation (EC) No. 1907/2006. For articles there is no obligation to classify acc. to CLP -Regulation. • 2.2 Labelling according to Regulation (EC) No 1272/2008 Labelling according to Regulation (EC) No 1272/2008 (CLP-Regulation): Not applicable • Additional VAC information: In the case of dust-producing processing, we recommend observance of the following warnings : The hazard statements result from the ingredients (composition) of the permant magnets and the applied coating.

Additional information

See also Chapter 11

Hazard statements

See also 'Other hazards' (chapter 2.3)) Harmful if swallowed. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. Route of exposure: Inhalation. Causes damage to organs through prolonged or repeated exposure.

Precautionary statements

Do not breathe dust/fume/gas/mist/vapours/spray. [In case of inadequate ventilation] wear respiratory protection. Wear protective gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Specific treatment (see on this label). If experiencing respiratory symptoms: Call a POISON CENTER/doctor. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Get medical advice/attention if you feel unwell. Rinse mouth. IF ON SKIN: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.

2.3 Other hazards

Dry mechanical processing of rare earth permanent magnet alloys is only permitted under special safety precautions because dusts which are capable of self-heating or pyrophorous dusts with a tendency to explode may be produced. In the case of wet mechanical processing the watery processing medium reacts with the magnet wear and may form hydrogen already at room temperature. Attention: Formation of Ex-atmospheres possible! Part of the resulting hydrogen is stored in the material. The resulting processing sludges must be kept under a protective liquid because drying out sludges are capable of self-heating or may react pyrophorously. In this case the stored hydrogen volume burns off with flames. Attention: Magnetized parts generate magnetic fields and are able to attract magnetizable materials. This may result in injury during handling of magnets. Electronic devices and measuring tools may be changed in calibration or damaged by the high magnetic field strength. Please keep magnetized magnets away from computers, displays and magnetic storage devices. Especially people with heart pacemakers must keep away from magnetic fields.

PBT Substances

Not applicable

vPvB Substances

Not applicable