Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
25-50%
General Information
Version
4
Revision date
2025-09-30
Product name
UZIN NC 182 MT
1.2.1 Relevant identified uses
Moisture Tolerant low slump patching and repair compound
Emergency telephone
+1 720-374-2113, +720-373-4810, 800-424-9300, +49 621 60 43 333
Icons in SDS
Company Information
company name
Uzin Utz North America Inc
e-mail address of the competent person responsible for the Safety Data Sheet
safety.us@uzin-utz.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H350, H372
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture GHS08 Health hazard Carcinogenicity 1A H350 May cause cancer. Route of exposure: Inhalation Specific target organ toxicity (repeated exposure) 1 H372 Causes damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation GHS05 Corrosion Eye damage 1 H318 Causes serious eye damage GHS07 Skin irritation 2 H315 Causes skin irritation
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS05 GHS08
Signal word
Danger
Hazardous Ingredients
Quartz (crystalline silica) Portland cement
Hazard statements
Causes skin irritation. (Contd. of page 1) Causes serious eye damage. May cause cancer. Route of exposure: Inhalation. Causes damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation.
Precautionary statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust. Wear protective gloves/protective clothing/eye protection/face protection. If on skin: Wash with plenty of soap and water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local/regional/national/international regulations.
Additional information
Restricted to professional users · Information pertaining to particular dangers for man and environment: · NFPA ratings (scale 0 - 4) Health = 2 0 Flammability = 0 2 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH *2 Health = *2 FIRE 0 Flammability = 0 REACTIVITY 0 Reactivity = 0
NFPA Ratings
Scale 0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe NFPA is the National Fire Protection Association.
HMIS® ratings
Scale 0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe HMIS®, the Hazardous Materials Identification System, is a registered mark of the National Paint and Coatings Association (NPCA). * Chronic health effect possible - inhalation of silica dust may cause lung injury/disease (silicosis). Take appropriate measures to avoid breathing dust. See sections 3, 8 and 11.
PBT Substances
This substance/mixture does not contain any components that can be considered persistent, bioaccumulative and toxic (PBT).
vPvB Substances
This substance/mixture does not contain any components that can be considered very persistent and very bioaccumulative (vPvB) at levels of 0.1%.
2.3 Other hazards
There are no adverse physical or health effects known that are not covered by the hazard classes of the Hazard Communications Standard.
2.1 Classification of the substance or mixture
GHS08 Health hazard Carcinogenicity 1A H350 May cause cancer. Route of exposure: Inhalation. Specific target organ toxicity (repeated exposure) 1 H372 Causes damage to the lung through prolonged or repeated exposure. Route of exposure: Inhalation. GHS05 Corrosion Eye damage 1 H318 Causes serious eye damage. GHS07 Skin irritation 2 H315 Causes skin irritation.