Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
75-100%
General Information
Version
4
Revision date
2018-03-17
Product name
UZIN PE 414 Turbo
1.2.1 Relevant identified uses
Primer Polyurethan Rapid
supplier name
Uzin Utz North America, Inc
Manufacturer Name
UZIN UTZ AG
Emergency telephone
800-424-9300, +49 621 60 43 333
Icons in SDS
Company Information
company name
UZIN UTZ AG
e-mail address of the competent person responsible for the Safety Data Sheet
msds.info@uzin-utz.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture GHS08 Health hazard Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled Carc. 2 H351 Suspected of causing cancer STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure GHS07 Acute Tox. 4 H332 Harmful if inhaled Skin Irrit. 2 H315 Causes skin irritation Eye Irrit. 2A H319 Causes serious eye irritation Skin Sens. 1 H317 May cause an allergic skin reaction STOT SE 3 H335 May cause respiratory irritation
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07, GHS08
Signal word
Danger
Hazardous Ingredients
Diphenylmethanediisocyanate, isomeres and homologues
Hazard statements
Harmful if inhaled. (Contd. on page 2) US (Contd. of page 1) Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Obtain special instructions before use. Wear protective gloves/protective clothing/eye protection/face protection. If on skin: Wash with plenty of water. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. If experiencing respiratory symptoms: Call a poison center/doctor. · NFPA ratings (scale 0 - 4) Health = 2 1 Flammability = 1 2 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH *2 Health = *2 FIRE 1 Flammability = 1 REACTIVITY 0 Reactivity = 0
NFPA Ratings
Scale 0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe NFPA is the National Fire Protection Association.
HMIS® ratings
Scale 0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe HMIS®, the Hazardous Materials Identification System, is a registered mark of the National Paint and Coatings Association (NPCA). * Chronic (long-term) health effects may result from repeated overexposure.
PBT Substances
Not applicable
vPvB Substances
Not applicable *
2.1 Classification of the substance or mixture
GHS08 Health hazard Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Carc. 2 H351 Suspected of causing cancer. STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure. GHS07 Acute Tox. 4 H332 Harmful if inhaled. Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. Skin Sens. 1 H317 May cause an allergic skin reaction. STOT SE 3 H335 May cause respiratory irritation.
