Multiple - Sterling Silver Casting Grain 22

Hazard statements (CLP)

H317, H351, H372

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

Classification (GHS-US) Classification of the Metal Alloys :

Classification (GHS-US)

Skin Sens. 1 H317 Carc. 2 H351 STOT RE 1 H372

2.2 Label elements

GHS-US Labeling

Hazard pictograms

GHS07 GHS08

Signal word

Danger

Hazard statements

H317 – May cause an allergic skin reaction. H351 – Suspected of causing cancer. H372 – Causes damage to organs through prolonged or repeated exposure.

Precautionary statements

P201 – Obtain special instructions before use P202 – Do not handle until all safety precautions have been read and understood. P260 – Do not breathe dust, fume. P264 – Wash hands, forearms and face thoroughly after handling. P270 – Do not eat, drink or smoke when using this product. P272 – Contaminated work clothing must not be allowed out of the workplace. P280 – Wear protective gloves, protective clothing, face protection, eye protection. P302+P352 – IF ON SKIN: Wash with plenty of water. P308+P313 – If exposed or concerned: Get medical advice/attention. P314 – Get medical advice/attention if you feel unwell. P321 – Specific treatment (see Section 4). P333+P313 – If skin irritation or rash occurs: Get medical advice/attention. P362+P364 – Take off contaminated clothing and wash it before reuse. P405 – Store locked up. P501 – Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.

2.3 Other hazards

Inhalation of dusts and fumes can cause metal fume fever. Symptoms can include a metallic or sweet taste in the mouth, sweating, shivering, headache, throat irritation, fever, chills, thirstiness, muscle aches, nausea, vomiting, weakness, fatigue, and shortness of breath. If heated to the point of fume generation, zinc fumes may cause metal fume fever. Otherwise, zinc is non-toxic. This product is present in a massive form as an alloy. It does not present the same hazards when the individual components are in their powdered forms. The materials present in this product in their powdered forms present aquatic toxicity to the environment and carcinogenicity. When processed or where dust is generated a combustible dust hazard may be present. Avoid generating dust, generating sparks, ignition sources, and take all precautions. Under normal use and handling of the solid form of this material there are few health hazards. Cutting, welding, melting, grinding etc. of these materials will produce dust, fume or particulate containing the component elements of these materials. Exposure to the dust, fume or particulate of these materials may present significant health hazards. Exposure to dust or fume may cause irritation of the eyes, skin and respiratory tract. Fine particulates dispersed in air may present an explosion hazard.

Ingredient(s) with unknown acute toxicity

Not available