ALUMINUM ALLOY SOLID WIRE MIG and TIG

SECTION 2: Hazards identification

67/548/EEC IMPORTANT ‐ This section covers the hazardous materials from which this product is manufactured. This data has been classified according to the criteria of the Globally

2.1 Classification of the substance or mixture

This product is not classified as hazardous according to applicable GHS hazard classification criteria

2.2 Label elements

Hazard Symbol – No symbol required

Signal word

No signal word required

Hazard statements

No applicable

Precautionary statements

Not Applicable INGREDIENTE Θ PELIGROSO Ε Ζ CAS IARC 65 NTP OSHAΗ ALUMINUM 7429‐90‐5 ---- BERYLLIUM 7440‐41‐7 1 K ---- X CHROME Σ 7440‐47‐3 ΣΣ 1ΣΣ, 3 ΣΣ K ΣΣ X COPPER 7440‐50‐8 ---- IRON 7439‐89‐6 ---- MAGNESIUM 7439‐95‐4 ---- MANGANESE 7439‐96‐5 ---- NICKEL 7440‐02‐0 1 K X SILICON 7440‐21‐3 ---- (Amorphous Silica Fume) 69012‐64‐2 3 K ---- X Ε – International Agency for Research on Cancer (1 – Human Carcinogen, 2A – Probably Carcinogenic to Humans, 2B – Possibly Carcinogenic to Humans, 3 – Unclassifiable as to Carcinogenicity in Humans, 4 Probably Not Carcinogenic to Humans) Ζ – US National Toxicology Program (K – Known Carcinogen, S – Suspected Carcinogen) Η – OSHA

Principle Routes of Exposure

Respiratory System, Eyes and/or Skin ARC RAYS: The welding arc can injure eyes and burn skin. ELECTRIC SHOCK: Arc welding and associated processes can kill. See Section 8. FUMES AND GASES: Can be dangerous to your health. Welding fumes and gases cannot be classified simply. The composition and quantity of both are dependent upon the metal being welded, the process, procedures and electrodes used. Most fume ingredients are present as complex oxides and compounds and not as pure metals. When the electrode is consumed, the fume and gas decomposition products generated are different in percent and form from the ingredients listed in Section 3. Decomposition products of normal operation include those originating from the volatilization, reaction or oxidation of the materials shown in this section, plus those from the base metal and coating, etc., as noted above. Monitor for the materials identified in the list within this section. Fumes from the use of this product may contain complex oxides or compounds of the following elements and molecules: amorphous silica fume, beryllium, chromium, manganese and nickel. Other reasonably expected constituents of the fume would also include complex oxides of iron and silicon. Gaseous reaction products may include carbon monoxide and carbon dioxide. Ozone and nitrogen oxides may be formed by the radiation from the arc. Other conditions which also influence the composition and quantity of the fumes and gases to which workers may be exposed include: coatings on the metal being welded (such as paint, plating or galvanizing), the number of welders and the volume of the work area, the quality and amount of ventilation, the position of the welder's head with respect to the fume plume, as well as the presence of contaminants in the atmosphere (such as chlorinated hydrocarbon vapors from cleaning and degreasing activities). One recommended way to determine the composition and quantity of fumes and gases to which workers are exposed is to take an air sample inside the welder's helmet if worn or in the worker's breathing zone. See ANSI/AWS F1.1, available from the "American Welding Society", P.O. Box 351040, Miami, FL 33135. Also, from AWS is F1.3 "Evaluating Contaminants in the Welding Environment ‐ A Sampling Strategy Guide", which gives additional advice on sampling.