MSDS 403

Hazard statements

R20/21/22, R34, R43, R52/53 3.

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Description CORROSIVE Causes burns. Harmful by inhalation, in contact with skin and if swallowed. May cause sensitisation by skin contact. Harmful to aquatic organisms, may cause Long-term DANGEROUS FOR THE ENVIRONMENT adverse effects in the aquatic environment Page 1 of 6 Advanced Composites Group Ltd Composites House, Sinclair Close Heanor Gate Industrial Estate Heanor, Derbys, DE75 7SP Telephone: 01773 766200 eins MENT. Registered Office Fax: 01773 530245 001 Registered No. 2264869 England E-Mail: info@acg.co.uk CERTIFICATE No. 924425 Internet: www.ace.co.uk 4, FIRST AID MEASURES Condition Treatment Advice Skin Contact lf drenched, remove contaminated clothing under safety shower. Flood exposed areas with water. Seek medical ald. Wash clothing before re- use. Eye Contact Flush immediately with water for at least 15 minutes holding eye lids apart. Seek immediate medical attention. Inhalation Remove casualty to fresh air. Obtain medical aid. Keep warm and at rest. If breathing is irregular or stopped, give artificial respiration. Ingestion If swallowed, do not induce vomiting. Seek medical aid. ff this is not immediately available give one or two pints of water to drink (if possible use charcoal slurry). FIREFIGHTING MEASURES Suitable Extinguishing Media Water Mist, Carbon Dioxide, Foam, Dry Powder. Unsuitable Extinguishing Media High pressure water jet. Exposure Hazards Do not release chemically contaminated water into drains, soil or surface water. Sufficient measures must be taken to contain water used for extinguishing. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Avoid contact with eyes, skin and clothing. Environmental Precautions Prevent contamination of soil, drains and surface waters. Methods for Cleaning Soak up with inert absorbent material and place in a suitable container for disposal as hazardous waste. 7. HANDLING AND STORAGE Handling Ensure good local ventilation. Avoid skin and eye contact. Do not eat, drink or smoke at the work place. Practise good personal hygiene. Do not breathe vapours /dust.

Storage

Store in cool dry location. Keep container tightly closed. Store at temperatures between 2 and 40°C, Practise good housekeeping and personal cleanliness. Storage class 8, Corrosive substances. Page 2 of 6 AN statements, technical information and recommendations contained in this data shect are given in good faith and are based on tests believed to be reliable, but their accuracy and completeness are not guaranteed. They do not constitute an offer to any person and shall not be deemed to form the basis of any subsequent contract, nor to constitute the suitability of the products for their intended use prior to any warranty or representation as to quality, merchantability or fitness for purpose, All products are sold subject to the seller’s Standard Terms and conditions of Sale. Accordingly, the user shalt determine purchase and shall assume all risk and liability in connection therewith. itis the responsibility of those wishing to sell items made from or erabadying the products to inform the user of the properties of the products and the purposes for which they may be suitable, together with all precautionary measures required in handling those products. The information contained herein is under constant review and fable te be modified from time to time. © Copyright 2006 - The Advanced Composites Group. All rights reserved 8. EXPOSURE CONTROLS, PERSONAL PROTECTION Technical Protective Measures No special measures required. Exposure Control Limits 10mg/? for dust generated when machining or finishing cured material. Respiratory Protection In case of insufficient ventilation wear suitable respiratory protection. Hand Protection Wear barrier cream and suitable impervious gloves. Eye Protection Wear suitable goggles, glasses or face protection. Skin Protection Wear overalls and safety shoes. Protective Measures Keep away from sources of ignition. Avoid contact with skin, eyes and clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Property Value/Comment Property Value/Comment Appearance Pale yellow Liquid Freezing Point N/A Odour Slight amine. Boiling Point 240°C/ 4642F Vapour Density N/A Oxidising Properties N/A Density LOlg/cm3 at 25°C Solubility in Water Slightly soluble Flashpoint 106°C / 223°F Vapour Pressure 1.4Pa at 20°C Autoignition N/A Explosive Properties N/A Temperature pH Value 12.8 (1:1 in water ) Viscosity 1000-2000mPa.s at 25°C 10. STABILITY AND REACTIVITY Thermal Decomposition >200°C / 392°F. Conditions to Avoid Excessive heat, static discharge. Materials to Avoid Strong acids, bases and oxidising agents. Hazardous Decomposition Products Oxides of carbon, nitrogen, and other toxic gases.

TOXICOLOGICAL INFORMATION

LDS5O Acute Oral Toxicity in Rats Approx. 1500 mg/kg. Eye Irritation Tested on Rabbits Corrosive, Skin Irritation Tested on Rabbits Corrosive. Skin Sensitisation Tested on Guinea Pigs Causes sensitisation. Page 3 of 6 Advanced Composites Group Ltd Composites House, Sinclair Clase Heanor Gate Industrial Estate Heanor, Derbys, DE75 7SP Telephone: 01773 766200 MANAGEMENT UAS Registered Office Fax: 01773 530245 001 Registered No. 2264869 England €-Mail: info@ acg.co.uk CERTIFICATE No. 924425 internet: www.ace.co.uk

ECOLOGICAL INFORMATION

No specific information. Prevent contamination of soil, drains or surface water.