General Information
Revision date
2017-07-18
Product name
USP 6400
Product Synonyms
NEW CHEMICAL
Chemical name
Petroleum Hydrocarbon
CAS No.
New
1.2.1 Relevant identified uses
High performance, impact resistant, shingle mat coating Instructions Wear appropriate PPE when handling molten materials
supplier name
U.S. Polyco, Inc
Emergency telephone
After Hours Emergency Contact (Chemtrec 1-800-424-9300
Icons in SDS
Company Information
company name
U.S. Polyco, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
jmiguez@uspolyco.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H303, H313, H315, H333, H402
Hazard statements
Code
Statements
H303
May be harmful if swallowed
Section 2
OSHA HCS Classification
Health, Acute toxicity, 5 Oral Health, Acute toxicity, 5 Dermal Health, Acute toxicity, 5 Inhalation Environmental, Hazards to the aquatic environment - Acute, 3 Health, Skin corrosion/irritation, 2
Signal word
WARNING
Hazard statements
H303 - May be harmful if swallowed H313 - May be harmful in contact with skin H333 - May be harmful if inhaled H402 - Harmful to aquatic life H315 - Causes skin irritation
Precautionary statements
P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash ... thoroughly after handling. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P302 + P334 - IF Hot Product comes in contact with the skin: Immerse in cool water, and keep area cool. P337 + P313 - If exposed to the eyes, and eye irritation persists: Get medical advice/attention. P501 - Dispose of contents/container according to state and federal regulations CGA-PG28 - Avoid spills. Do not walk on or roll equipment over spills.
Principle Routes of Exposure
Eyes; Ingestion; Inhalation; Skin; Target Organs: Skin; Respiratory system; Inhalation: Minimal respiratory tract irritation may occur with exposure to a large amount of material. Skin Contact: May cause burning if material is at elevated temperatures. May cause irritation. Eye Contact: May cause irritation. May cause permanent eye damage, if hot material comes in contact with the eye Ingestion: Ingestion is not an applicable route of entry for intended use.
2.3 Other hazards
WARNING Dark rubbery substance at ambient temperature with a mild aromatic Hydrocarbon odor. Normally transported at high temperatures in molten form. May emit vapors when heated in excess of ~ 300F. Molten asphalt can cause thermal burns to eyes and skin. Can burn in a fire. Evolves toxic levels of carbon monoxide, carbon dioxide, irritating aldehydes and ketones during combustion.
