Note: Ingredients listed on restricted chemical lists
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
N/A
EC/CAS
68476-86-8
Name of the chemical
Petroleum gases, liquefied, sweetened
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2018-06-14
Product name
CorrosionX Heavy Duty Aerosol
Manufacturer Name
U.S. Corrosion Technologies, LLC
Icons in SDS
Company Information
company name
U.S. Corrosion Technologies, LLC
GHS Information
Signal word
DANGER
Section 2
Health hazards
Eye Irritation Category 2B STOT-SE Category 3 Carcinogenicity Category 1A
Physical hazards
Gases Under Pressure Compressed Gas Flammable Aerosols Category 1
2.3 Other hazards
None
Signal word
DANGER
Hazard pictograms
Exclamation Mark, Flame, Gas Cylinder, Health Hazard
Hazard statements
May cause cancer by inhalation Causes eye irritation May cause dizziness or drowsiness Extremely flammable aerosol Contains gas under pressure; may explode if heated
Precautionary statements
Pressurized container: Do not pierce or burn, even after use. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 122ºF/50ºC. Keep away from heat, hot surfaces, sparks and open flames - No smoking. Do not spray on an open flame or other ignition source. Wash hands thoroughly after handling. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. If exposed or concerned; get medical advice. Use only outdoors or in a well-ventilated area. Avoid breathing mist and vapors. Dispose of contents and container in accordance with applicable regulations. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell.
