1.0

Hazard statements (CLP)

H222, H229, H318, H336

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Classification according to the model Work Health and Safety Regulations (WHS Regulations) Classification of the hazardous chemical

Hazard pictograms

Flame Corrosion Exclamation mark

Signal word

Danger

Contains

acetone (10 – 30 %); ethyl methyl ketone (< 10 %); n-butyl acetate (< 10 %); cyclohexanone (< 10 %); methyl acetate (< 10 %)

Hazard statements

H222 - Extremely flammable aerosol H229 - Pressurised container: May burst if heated H318 - Causes serious eye damage H336 - May cause drowsiness or dizziness

Precautionary statements

P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing fume, spray, vapours. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear eye protection, protective clothing, protective gloves. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C. P501 - Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Ingredient(s) with unknown acute toxicity

4.22% of the mixture consists of ingredient(s) of unknown acute toxicity (Inhalation (Vapours))

Other hazards which do not result in classification

No additional information available

2.1 Classification of the substance or mixture

Classification according to the model Work Health and Safety Regulations (WHS Regulations) Aerosol, Category 1 H222;H229 Serious eye damage/eye irritation, Category 1 H318 Specific target organ toxicity – Single exposure, Category 3, Narcosis H336