General Information
Revision date
2012-12-11
Product name
Heat-Shrinkable Non-Flame-Retardant Polyolefin Products
Chemical name
Cross-linked heat-shrinkable polyolefin products
1.2.1 Relevant identified uses
Typical uses of heat-shrinkable polymeric products include primary electrical insulation, EMI/RFI shielding, cable jacketing and repair, strain relief, waterproofing, cable/pipe
supplier name
TE Connectivity Telecom OSP
Manufacturer Name
Tyco Electronics Corporation a TE Connectivity Ltd. company
Emergency telephone
1-800-424-9300, 1-703-527-388...
Icons in SDS
Company Information
company name
Tyco Electronics Corporation a TE Connectivity Ltd. company
Section 2
SECTION 2: Hazards identification
OSHA GHS Classifications: Not applicable to articles
Health hazards
Reproductive/Developmental – NL None of the ingredients to which users may be exposed and which are present at equal to or greater than 0.1% of the product
Environmental hazards
Acute Toxicity – NL Target Organ Toxicity – NL Aquatic Toxicity – NL Skin Corrosion/Irritation – NL Eye Corrosion/Irritation - NL
Physical hazards
Respiratory or Skin Sensitization – NL Flammability – NL (Not flammable Mutagenicity – NL or combustible) Carcinogenicity – NL NL – Not listed. No GHS category corresponds to the low level of hazard anticipated when used under normal conditions Note: The Globally Harmonised System (GHS) for Classification of Chemical Substances had not been fully implemented in Canada at the time that this safety data sheet was developed
2.2 Label elements
As required for Finished Goods according to End-Use Products Regulations
Hazard pictograms
(Industrial/Commercial Goods Only) Not Applicable
Precautionary statements
Not applicable EMERGENCY OVERVIEW: Heat-Shrinkable Polymeric Products are not hazardous during proper installation but may emit hazardous thermal decomposition and combustion by-products if overheated to degradation*. Base polymer materials include polyethylene and olefin copolymers. Heat-shrinkable products may be coated with or used in conjunction with adhesives/mastics which are based on olefin copolymers or polyamides. Larger products may be coated on their exterior with an acrylic-based temperature- sensitive paint which indicates to the installer when sufficient heat has been applied to cause the adhesive to flow. *For more information thermal decomposition and combustion by-products, refer to Section 10: “Hazardous Decomposition or By-Products.”
Potential health effects
EYES: Contact with molten material may cause thermal burns. SKIN: This product is not expected to be a skin irritant. Contact with the molten material may cause thermal burns. No harmful effects are expected from skin absorption of this product. INGESTION: Ingestion of this product is highly unlikely. There is insufficient information available on this material to predict the effects from ingestion. INHALATION: In common with most organic materials, thermal degradation and combustion by-products may be toxic and should not be inhaled. (See Section 10 for thermal decomposition products).
Acute Health Hazards
Overheating the product to charring or burning may produce vapours that may cause eye, skin, nose and throat irritation.
Medical Conditions Generally Aggravated by Exposure
Persons with pre-existing eye, skin, or respiratory disorders (e.g., asthma conditions) may be more susceptible to the effects of these vapours.
Additional information
None.
2.1 Classification of the substance or mixture
Health Hazards Reproductive/Developmental – NL Environmental Hazards Acute Toxicity – NL Target Organ Toxicity – NL Aquatic Toxicity – NL Skin Corrosion/Irritation – NL Eye Corrosion/Irritation - NL Physical Hazards Respiratory or Skin Sensitization – NL Flammability – NL (Not flammable Mutagenicity – NL or combustible) Carcinogenicity – NL NL – Not listed. No GHS category corresponds to the low level of hazard anticipated when used under normal conditions. Note: The Globally Harmonised System (GHS) for Classification of Chemical Substances had not been fully implemented in Canada at the time that this safety data sheet was developed.