General Information
Revision date
2018-06-14
Product name
Water Based Dry-Erase -Hardener Part A
CAS No.
28182-81-2
1.2.1 Relevant identified uses
The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller"s published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller"s sales agreement
Icons in SDS
Company Information
company name
TSC Coatings
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200 According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
2.1 Classification of the substance or mixture
Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated 2 (lungs) exposure (Inhalation) Aquatic Acute 3
Signal word
Danger
Hazard statements
May cause an allergic skin reaction. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause damage to organs (Lungs) through prolonged or repeated exposure if inhaled.
Prevention
Wear eye/face protection. Wear protective gloves. Use only outdoors or in a well-ventilated area. Do not breathe dust/gas/mist/vapors. In case of inadequate ventilation wear respiratory protection. The type of respiratory protection selected must comply with the requirements set forth in OSHA's Respiratory Protection Standard (29 CFR 1910.134) or regional standards. For additional details, see section 8 of the SDS. Avoid release to the environment. Contaminated work clothing should not be allowed out of the workplace. Wash with plenty of water and soap thoroughly after handling
Response
If eye or skin irritation or rash occurs: Call a POISON CENTER or doctor/physician. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Take off contaminated clothing and wash before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Precautionary statements
Disposal) Dispose of contents/container to hazardous or special waste collection point.
2.3 Other hazards
No specific dangers known According to Regulation 1994 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200 Emergency overview WARNING: May cause sensitization by skin contact. HARMFUL IF INHALED. CONTAINS ISOCYANATES. INHALATION OF ISOCYANATE MISTS OR VAPORS MAY CAUSE RESPIRATORY IRRITATION, BREATHLESSNESS, CHEST DISCOMFORT AND REDUCED PULMONARY FUNCTION. OVEREXPOSURE WELL ABOVE THE PEL MAY RESULT IN BRONCHITIS, BRONCHIAL SPASMS AND PULMONARY EDEMA. LONG-TERM EXPOSURE TO ISOCYANATES HAS BEEN REPORTED TO CAUSE LUNG DAMAGE, INCLUDING REDUCED LUNG FUNCTION WHICH MAY BE PERMANENT. ACUTE OR CHRONIC OVEREXPOSURE TO ISOCYANATES MAY CAUSE SENSITIZATION IN SOME INDIVIDUALS, RESULTING IN ALLERGIC RESPIRATORY REACTIONS INCLUDING WHEEZING, SHORTNESS OF BREATH AND DIFFICULTY BREATHING. ANIMAL TESTS INDICATE THAT SKIN CONTACT MAY PLAY A ROLE IN CAUSING RESPIRATORY SENSITIZATION. Use with local exhaust ventilation. Wear protective clothing. Wear full face shield if splashing hazard exists.
