TriRoof HPX Hybrid Polymer Liquid Membrane

Tricel Composites (GB) Limited

Revision date : 2022-03-27

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS05 GHS06 GHS08 GHS09
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

77-58-7

Name of the chemical

Dibutylzinndilaurat; Dibutyl[bis(dodecanoyloxy)]stannan (2017/776)

Concentration

N/A

General Information

Version

0.0

Revision date

2022-03-27

Product name

TriRoof HPX Hybrid Polymer Liquid Membrane

CAS No.

1760-24-3

supplier name

Tricel Composites (GB) Limited

Emergency telephone

+44 (0) 113 270 3133

Icons in SDS

GHS02 GHS05 GHS06 GHS08 GHS09

Company Information

company name

Tricel Composites (GB) Limited

e-mail address of the competent person responsible for the Safety Data Sheet

sales@tricelcomposites.co.uk

GHS Information

Signal word

Danger

Section 2

Hazard statements

see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation Remove person to fresh air and keep comfortable for breathing. First-aid measures after skin contact Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. First-aid measures after eye contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion Call a poison centre or a doctor if you feel unwell. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/effects after skin contact May cause an allergic skin reaction. Symptoms/effects after eye contact Eye irritation. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Water spray. Dry powder. Foam. Carbon dioxide. 5.2 Hazardous decomposition products in case of fire ` 5.3 Advice for firefighters Protection during firefighting 6.1. Personal precautions, protective equipment, and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. 6.1.2. For emergency responders Protective equipment Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection". 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and materials for containment and cleaning up Methods for cleaning up Take up liquid spilt into the absorbent material.

Further information

Dispose of materials or solid residues at an authorized site. 6.4. Reference to other sections For further information refer to section 13. 7.1. Precautions for safe handling Ensure good ventilation of the workstation. Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear personal protective equipment. Hygiene measures Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Store in a well-ventilated place. Keep cool. Incompatible materials Heat sources. Direct sunlight. 7.3. Specific end use(s No additional information is available 8.1. Control parameters Stannane, dibutylbis[(1-oxododecyl)oxy]- (77-58-7) Japan Exposure limits (ACGIH) TWA 0.1 mg/m3,STEL 0.2 mg/m3 (as Sn) (Skin) 8.2. Exposure controls Appropriate engineering controls Ensure good ventilation of the workstation. Hand protection Protective gloves Eye protection Safety glasses Skin and body protection Wear suitable protective clothing Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment Environmental exposure controls Avoid release to the environment. ` SECTION 9: Physical and Chemical Properties 9.1. Information on basic physical and chemical properties Physical state Liquid Appearance Viscous liquid. Colour Grey/White. Odour Characteristic. Odour threshold No data available pH No data available Relative evaporation rate (butylacetate=1) No data available Melting point: Not applicable Freezing point No data available Boiling point No data available Flash point No data available Auto-ignition temperature No data available Decomposition temperature No data available Flammability (solid, gas) Not applicable Vapour presufre No data available Relative vapour density at 20 °C No data available Relative density No data available Density 1.44 g/ml Solubility No data available Log Pow No data available Viscosity, kinematic No data available Viscosity, dynamic 10000 - 20000 cP Explosive properties No data available Oxidising properties No data available Explosive limits No data available No additional information is available 10.1. Reactivity The product is non-reactive under normal conditions of use, storage, and transport. 10.2. Chemical stability Stable under normal conditions. 10.3. Possibility of hazardous reactions No dangerous reactions are known under normal conditions of use. 10.4. Conditions to avoid None under recommended storage and handling conditions (see section 7). No flames, no sparks. Eliminate all sources of ignition. 10.5. Incompatible materials No additional information is available ` 10.6. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTI ION 11: Toxicological Information 11.1. Information on toxicological effects Acute toxicity Not classified 1,2-Ethanediamine, N-[3-(trimethoxysilyl)propyl]- ( 1760-24-3) LD50 oral rat 2995 mg/kg LD50 dermal rat > 2000 mg/kg Stannane, dibutylbis[(1-oxododecyl)oxy]- ( 77-58-7) LD50 oral 175 mg/kg LC50 inhalation rat (Dust/Mist - mg/l/4h) 0.075 mg/l/4h Skin corrosion/irritation Serious eye damage/irritation Causes serious eye irritation. Respiratory or skin sensitisation May cause an allergic skin reaction. Germ cell mutagenicity Not classified Carcinogenicity - Description Not classified Reproductive toxicity Not classified STOT-single exposure Not classified STOT-repeated exposure Not classified Aspiration hazard Not classified 12.1. Toxicity Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects on the environment. Stannane, dibutylbis[(1-oxododecyl)oxy]- ( 77-58-7) EC50 Daphnia 1 0.66 mg/l 12.. Persistence and degradability 1,2-Ethanediamine, N-[3-(trimethoxysilyl)propyl]- ( 1760-24-3) Biodegradation 38 % 28 d 12.. Bioaccumulative potential No additional information is available 12.4

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.