Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-89-8
Name of the chemical
Solvent naphtha (petroleum), light aliph
Concentration
40-50
EC/CAS
68476-86-8
Name of the chemical
Petroleum gases, liquefied, sweetened
Concentration
10-20
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
1-10
General Information
Version
1.01
Revision date
2015-06-10
Product name
Plasto-Mend TPO Adhesion Promoter
Product Synonyms
None
1.2.1 Relevant identified uses
Bonding agent. For Professional and Industrial Use Only
1.2.2. Uses advised against
Not for sale to the general public
supplier name
Bonding agent. For Professional and Industrial Use Only
Emergency telephone
+1-703-527-3887, 1-800-424-9300
Icons in SDS
Company Information
company name
Transtar Autobody Technologies
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H222, H223, H229, H280, H304, H315, H317, H319, H336
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
Classification Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin Sensitization Category 1 Specific target organ toxicity (single exposure) Category 3 Aspiration toxicity Category 1 Flammable aerosols Category 1 Gases under pressure Compressed Gas
2.2 Label elements
Emergency Overview DANGER
Hazard statements
Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction May cause drowsiness or dizziness May be fatal if swallowed and enters airways Extremely flammable aerosol Contains gas under pressure; may explode if heated Appearance Hazy Physical state Aerosol Odor Solvent
Prevention
Wash face, hands and any exposed skin thoroughly after handling Wear protective gloves/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing should not be allowed out of the workplace Use only outdoors or in a well-ventilated area Keep away from heat/sparks/open flames/hot surfaces. — No smoking Do not spray on an open flame or other ignition source Pressurized container: Do not pierce or burn, even after use
Response
Specific treatment (see first aid on this label) IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash before reuse If skin irritation or rash occurs: Get medical advice/attention IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician Do NOT induce vomiting
Storage
Store locked up Store in a well-ventilated place. Keep container tightly closed Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant
2.3 Other hazards
None
Further information
• Causes mild skin irritation 0% of the mixture consists of ingredient(s) of unknown toxicity
2.1 Classification of the substance or mixture
Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin Sensitization Category 1 Specific target organ toxicity (single exposure) Category 3 Aspiration toxicity Category 1 Flammable aerosols Category 1 Gases under pressure Compressed Gas
