Control Flow Seam Sealer

Transtar Autobody Technologies

Revision date : 2010-08-20

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

90-72-2

Name of the chemical

2,4,6-tris(dimethylaminomethyl)phenol

Concentration

N/A

Listed in

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

General Information

Revision date

2010-08-20

Product name

Control Flow Seam Sealer

1.2.1 Relevant identified uses

Sealant 24 Hour Emergency Phone(s)

Icons in SDS

Company Information

company name

Transtar Autobody Technologies

Section 2

SECTION 2: Hazards identification

CAUTION! COMBUSTIBLE IRRITANT.

HMIS® ratings

2 - 1 0 1 2 0

Principle Routes of Exposure

Inhalation Skin Contact Eye Contact Ingestion Exposure to this material may affect the following organs: Eyes Lungs Skin Effects of Overexposure, Control Flow Seam Sealer: Short Term Exposure Inhalation can cause irritation of the eyes and respiratory tract, causing cough and phlegm. Irritates the skin. Inhalation may cause irritation to respiratory tract. Skin contact may cause irritation. Eye contact may cause irritation. Long Term Exposure High exposures may cause lung irritation; bronchitis may develop. Continued exposure may result in emphysema, lung scarring, lung fibrosis, and tumors. A potential occupational carcinogen. Exposure to levels well above 3.5 mg/m3 for several months may result in damage to the skin and nails, temporary or permanent damage to the lungs and breathing passages, and adversely affect the heart. Carbon Black containing PAH greater than 0.1% should be considered a suspect carcinogen. Lungs may be affected by repeated or prolonged exposure at very high concentrations: Some Carbon blacks may contain compounds which are carcinogenic and as organic extracts of these have been classified as possibly carcinogenic to humans, special care should be taken to avoid exposure to such extracts. Lung effects remain controversial and may be due to contaminants. It is probable that minor effects reported are non-specific effects associated with exposure to nuisance dusts in general. Polyaromatic hydrocarbons (PAH) are reportedly present in some carbon blacks. Depending on the process of manufacture, there are variations in their chemical compositions. The following chemicals comprise 0.1% or more of this mixture and are listed and/or classified as carcinogens or potential carcinogens by the NTP, IARC, OSHA (mandatory listing), or ACGIH (optional listing). Titanium Dioxide (Dust): (RTECS) Carbon Black: (ACGIH) Silicon dioxide, chemically prepared: 1-2A,N-1, CP65 Chronic Exposure: Repeat contact with skin may irritate moderately. Acetic acid may cause skin irritation.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.