Note: Ingredients listed on restricted chemical lists
EC/CAS
276-737-9/72623-86-0
Name of the chemical
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
≥75
EC/CAS
265-157-1/64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
≥3
EC/CAS
265-169-7/64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
≥1
EC/CAS
265-090-8/64741-88-4
Name of the chemical
Distillates (petroleum), solvent-refined heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained as the raffinate from a solvent extraction process. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 19 10-6 m2.s-1 at 40 °C.)
Concentration
≥0.5
General Information
Version
2.0
Revision date
2024-12-16
Product name
79410 - Motor Oil Synthetic DXI 0W-16
Emergency telephone
+353 1 809 2566, +353 1 809 2166
Icons in SDS
Company Information
company name
Transnational Blenders bv
e-mail address of the competent person responsible for the Safety Data Sheet
technical@tnb.nl
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.
2.2 Label elements
Labelling
Supplemental label elements
EUH210 - Safety data sheet available on request.
2.3 Other hazards
Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or substance(s) are not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %