General Information
Revision date
2017-12-11
Product name
_ MIL-PRF-85582E Type | Class C2 Comp. A
Chemical name
Epoxy Resin
supplier name
TRANSCHEM COATINGS ~
Icons in SDS
Company Information
company name
TRANSCHEM COATINGS ~
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H335, H350, H373
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Signal word
Danger
Hazard statements
Flammable liquid and vapor. Harmful if swallowed or if inhaled. Causes serious eye irritation. Causes skin irritation. May cause cancer. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. Page 2 of 10 (Continued) |
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood Use personal protective equipment as required. Wear protective gloves. Wear eye or face protection. Keep away from heat. hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting and all material-handling equipment. Use only non-sparking tools, Take precautionary measures against static discharge. Keep container tightly closed. Use only outdoors or in a well-ventilated area. Do not breathe vapor. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Response
Get medical attention if you feel unwell. IF exposed or concerned Get medical attention. IF INH ; Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF SWALLOWED: Call a POISON CENTER or physician if you feel unwell. Rinse mouth. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing, If skin irritation occurs; Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.
Storage
Store locked up. Store in a well-ventilated place. Keep cool
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation
2.1 Classification of the substance or mixture
ACUTE TOXICITY (oral) - Categs ACUTE TOXICITY (inhalation) - Category 2 SKIN CORROSION/IRRITATION - Catego SERIOUS EYE DAMAGE/ EY! TATION - Category 1A CARCINOGENICITY - Categoi SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation) - Category 2 SPECIFIC TARGET IRGAN TOXICITY (REPEATED EXPOSURE) - Catege