IDENTIFICATION AND EMERGENCY INFORMATION

SECTION 2: Hazards identification

Health Flammability Reactivity 1 0 FLAMMABLE OR EXPLOSIVE LIMITS (approximate percent by volume in air): Estimated values: lower N/E upper N/E EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES: Foam, water spray (fog), dry chemical, carbon dioxide type extinguishing agents may all be suitable for extinguishing fires involving this type product, depending on size or potential size of fire and circumstances related to the situation. Water or foam may cause frothing. Use water to keep fire-exposed containers cool. Water froth may be used to flush spills away from exposure. Minimize breathing gases, vapor, fumes, or decomposition products. Use NIOSH/MSHA approved supplied-air preathing equipment for enclosed or confined spaces or as otherwise needed. aie FIRE AND EXPLOSION HAZARDS: hija "EMPTY" CONTAINER WARNING: Empty containers retain residue (liquid or vapor) and can be dangerous. DO NOT PRESSURIZE, WELD, CUT BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to clean since residue is difficult to remove. "Empty" drums should be completely drained, properly bunged, and returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with government regulations. HEALTH AND HAZARD INFORMATION EXPOSURE LIMIT FOR TOTAL PRODUCT: Monitor data listed in the Components and Hazard Information section. VARIABILITY AMONG INDIVIDUALS: Page 3 MATERIAL SAFETY DATA SHEET FOR LACTUCA 1235 S TOTAL Lubricants USA, Inc. Airport Road Rockingham NC 28379-1058 Revision Date: Date Issued 28-OCT-04 06-FEB-07 HEALTH AND HAZARD INFORMATION Health studies have shown that many petroleum hydrocarbons and synthetic lubricants pose potential human health risks which vary from person to person. As a precaution, exposure to liquids, vapors, mists, or fumes should be minimized. EFFECTS OF OVEREXPOSURE (Signs and symptoms of exposure) Prolonged or repeated skin contact with this product tends to remove skin oils possibly leading to irritation and dermatitis. Product contacting the eye may cause irritation. Product has a low order of oral and dermal toxicity. Possible aspiration hazard. Induced vomiting may cause aspiration of product into the lungs. (See Emergency First Aid Section) . PHYSICAL DATA The following data are approximate or typical values and should not be used for precise design purposes. BOILING RANGE: VAPOR PRESSURE: Wide range < 0.1 @ 38°C/100°F SPECIFIC GRAVITY (25°C/25°C): VAPOR DENSITY (AIR = i): (WATER = 1) > 8B < 1.0 MOLECULAR WEIGHT | PERCENT VOLATILE BY VOLUME: Wide range Negligible EVAPORATION RATE @ 1 ATM. AND 25°C SOLUBILITY IN WATER @ 1 ATM. and 25°C (77°F) (n-BUTYL ACETATE = 1): (77°F) < 1.0 Forms emulsion POUR, CONGEALING OR MELTING POINT: FREEZING POINT: n/e REACTIVITY This product is stable and will NOT react violently with water. Hazardous polymerization will not occur. Avoid contact with strong oxidants such as liquid chlorine, concentrated oxygen, sodium hypochlorite or calcium hypochlorite. Do not mix with nitrites due to the possible formation of nitrosamines. DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS: Fumes, smoke, carbon monoxide and other decomposition products, in case of incomplete combustion. CONDITIONS TO AVOID: Open flames. > Jeff Bolduc ig004/005 Page 4 MATERIAL SAFETY DATA SHEET FOR LACTUCA 1235 § TOTAL Lubricants USA, Inc. Airport Road Rockingham NC 28379-1058 REVISION DATE DATE ISSUED 28-OCT-04 06-FEB-07 TOXICITY ORAL