Dimethylsulfamoyl Chloride

Hazard statements (CLP)

H290, H314, H330, H350

Code

Statements

H290

May be corrosive to metals

SECTION 2: Hazards identification

Classification of the substance or mixture

Physical hazards

Corrosive to metals Category 1

Health hazards

Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 4 Acute toxicity (Inhalation) Category 2 Skin corrosion/irritation Category 1B Serious eye damage/eye irritation Category 1 Carcinogenicity Category 1A

Environmental hazards

Not classified

Signal word

Danger

Hazard statements

May be corrosive to metals Fatal if inhaled Harmful if swallowed or in contact with skin. Causes severe skin burns and eye damage May cause cancer

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in original container. Do not breathe mist, vapors or spray. Use only outdoors or in a well-ventilated area. Do not eat, drink or smoke when using this product. Wash hands and face thoroughly after handling. Wear respiratory protection. Wear protective gloves, protective clothing, face protection.

Response

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Immediately call a POISON CENTER or doctor. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. IF exposed or concerned: Get medical advice or attention. Absorb spillage to prevent material damage.

Storage

Store in corrosive resistant container with a resistant inner liner. Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents and container in accordance with local, regional, national regulations.

2.1 Classification of the substance or mixture

PHYSICAL HAZARDS Corrosive to metals Category 1 HEALTH HAZARDS Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 4 Acute toxicity (Inhalation) Category 2 Skin corrosion/irritation Category 1B Serious eye damage/eye irritation Category 1 Carcinogenicity Category 1A ENVIRONMENTAL HAZARDS Not classified