Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
5-<20%
EC/CAS
13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
10-<20%
General Information
Revision date
2019-05-29
Product name
EZ Flow Foam
Emergency telephone
24/7 USA: 800-535-5053
Icons in SDS
Company Information
company name
Todol Products
e-mail address of the competent person responsible for the Safety Data Sheet
info@todol.com
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
29 CFR Part 1910.1200 Flammable aerosols: Flam. Aerosol 1 Gases under pressure: Compressed gas Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2A Respiratory or skin sensitization: Resp. Sens. 1 Respiratory or skin sensitization: Skin Sens. 1 Carcinogenicity: Carc. 2 Specific target organ toxicity single exposure: STOT SE 3 (respiratory tract irritation) Specific target organ toxicity repeated or prolonged exposure: STOT RE 2
2.2 Label elements
29 CFR Part 1910.1200
Signal word
Danger
Hazard statements
Extremely flammable aerosol Contains gas under pressure; may explode if heated Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation Suspected of causing cancer May cause damage to organs through prolonged or repeated exposure
Precautionary statements
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not breathe dust/fume/gas/mist/vapors/spray. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Wear respiratory protection. If on skin: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container to an appropriate recycling or disposal facility.
2.3 Other hazards
In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.