Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
60-100% 30-<60%
EC/CAS
136-52-7
Name of the chemical
Cobalt bis(2-ethylhexanoate)
Concentration
0.1-<1%
EC/CAS
107-21-1
Name of the chemical
Ethane-1,2-diol
Concentration
0-<0.1%
EC/CAS
71-43-2
Name of the chemical
Benzol
Concentration
0-<0.1%
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
0-<0.1%
EC/CAS
1338-02-9
Name of the chemical
Naphthenic acids, copper salts
Concentration
0-<0.1%
EC/CAS
121-69-7
Name of the chemical
N,N-Dimethylanilin
Concentration
0-<0.1% 25320-85- 0-<0.1%
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
0-<0.1%
EC/CAS
67-56-1
Name of the chemical
Methanol
Concentration
0-<0.1%
EC/CAS
556-67-2
Name of the chemical
D4
Concentration
0-<0.1%
EC/CAS
541-02-6
Name of the chemical
D5
Concentration
0-<0.1%
General Information
Revision date
2022-08-29
Product name
LAVALOCK CLEAR
Product Synonyms
SERIES 1418, PART A UN1263
1.2.1 Relevant identified uses
industrial paint
1.2.2. Uses advised against
Consumer use, For professional use only. Not for residential use
Emergency telephone
800-535-5053
Icons in SDS
Company Information
company name
Tnemec Company
Section 2
SECTION 2: Hazards identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Classification
Prevention
Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Use only outdoors or in a well-ventilated area Do not breathe dust/fume/gas/mist/vapors/spray Keep away from heat/sparks/open flames/hot surfaces. — No smoking Keep container tightly closed Ground/bond container and receiving equipment Use only non-sparking tools Take precautionary measures against static discharge Use explosion-proof electrical/ventilating/lighting/mixing/equipment
Response
IF exposed or concerned: Get medical advice/attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation occurs: Get medical advice/attention IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell Rinse mouth In case of fire: Use CO2, dry chemical, or foam for extinction
Storage
Store locked up Store in a well-ventilated place. Keep cool Keep away from children
Disposal
Dispose of contents/container to an approved waste disposal plant
2.3 Other hazards
If product is in liquid or paste form, physical or health hazards listed related to dust are not considered significant. However, product may contain substances that could be potential hazards if caused to become airborne due to grinding, sanding or other abrasive processes.
Further information
SEE SAFETY DATA SHEET Very toxic to aquatic life with long lasting effects Acute Toxicity 55 % of the mixture consists of ingredient(s) of unknown toxicity.
2.1 Classification of the substance or mixture
OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute toxicity - Oral Category 4 Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2 Carcinogenicity Category 2 Specific target organ toxicity (repeated exposure) Category 1 Flammable Liquids