ENDURA-SHIELD WHITE

Tnemec Company, Inc.

Revision date : 2024-05-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

10-<30%

EC/CAS

98-56-6

Name of the chemical

4-Chloro-alpha,alpha,alpha-trifluorotoluene

Concentration

1-<10%

EC/CAS

7631-86-9

Name of the chemical

Silver adsorbed on silicon dioxide

Concentration

1-<10%

EC/CAS

64742-95-6

Name of the chemical

Solvent naphtha (petroleum), light arom

Concentration

0.1-<1%

General Information

Version

8

Revision date

2024-05-06

Product name

ENDURA-SHIELD WHITE

Product Synonyms

SERIES 73, PART A UN1263

1.2.1 Relevant identified uses

industrial paint

1.2.2. Uses advised against

Consumer use, For professional use only. Not for residential use

Emergency telephone

800-535-5053

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Tnemec Company, Inc.

Section 2

SECTION 2: Hazards identification

This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Classification

Prevention

Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Avoid breathing dust/fume/gas/mist/vapors/spray Contaminated work clothing should not be allowed out of the workplace Use only outdoors or in a well-ventilated area Keep away from heat/sparks/open flames/hot surfaces. — No smoking Keep container tightly closed Ground/bond container and receiving equipment Use only non-sparking tools Take precautionary measures against static discharge Use explosion-proof electrical/ventilating/lighting/mixing/equipment Keep cool

Response

IF exposed or concerned: Get medical advice/attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation or rash occurs: Get medical advice/attention Wash contaminated clothing before reuse IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing In case of fire: Use CO2, dry chemical, or foam for extinction

Storage

Store locked up Store in a well-ventilated place. Keep container tightly closed

Disposal

Dispose of contents/container to an approved waste disposal plant

Further information

Harmful to aquatic life with long lasting effects Acute Toxicity 18.5915 % of the mixture consists of ingredient(s) of unknown toxicity.

2.1 Classification of the substance or mixture

OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Serious eye damage/eye irritation Category 2 Skin sensitization Category 1 Carcinogenicity Category 1B Reproductive Toxicity Category 2 Specific target organ toxicity (single exposure) Category 3 Flammable Liquids

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.