Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
30-60%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
10-30% 10-30%
EC/CAS
98-56-6
Name of the chemical
4-Chloro-alpha,alpha,alpha-trifluorotoluene
Concentration
1-10%
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
1-10%
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
0.1-1% -1% 0.1-1%
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
0.1-1%
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
-1%
EC/CAS
70657-70-4
Name of the chemical
2-methoxypropylacetate
Concentration
0-0.1%
EC/CAS
1185-81-5
Name of the chemical
Dibutyltin dilauryl mercaptide
Concentration
0-0.1% 0-0.1% 0-0.1% 0-0.1% 0-0.1% 0-0.1%
General Information
Version
4
Revision date
2016-09-28
Product name
ENDURA-SHIELD TNEMEC WHITE
Product Synonyms
SERIES 1095, PART A
1.2.1 Relevant identified uses
industrial paint
1.2.2. Uses advised against
Consumer use, For professional use only
Emergency telephone
800-535-5053
Icons in SDS
Company Information
company name
Tnemec Company, Inc.
Section 2
SECTION 2: Hazards identification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Classification
Prevention
Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Use only outdoors or in a well-ventilated area Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Do not breathe dust/fume/gas/mist/vapors/spray Do not eat, drink or smoke when using this product Keep away from heat/sparks/open flames/hot surfaces. — No smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting/mixing/equipment Use only non-sparking tools Take precautionary measures against static discharge Keep cool
Response
IF exposed or concerned: Get medical advice/attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact — if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation or rash occurs: Get medical advice/attention Wash contaminated clothing before reuse IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing In case of fire: Use CO2, dry chemical, or foam for extinction
Storage
Store locked up Store in a well-ventilated place. Keep container tightly closed Keep away from children
Disposal
Dispose of contents/container to an approved waste disposal plant
Further information
Cancer hazard. Contains crystalline silica which can cause cancer. (Risk of cancer depends on duration and level of exposure). Respirable crystalline silica (quartz) can cause silicosis, a fibrosis (scarring) of the lungs SEE SAFETY DATA SHEET Acute Toxicity 27.0654 % of the mixture consists of ingredient(s) of unknown toxicity. ie
2.1 Classification of the substance or mixture
OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute toxicity - Inhalation (Vapors) Category 4 Serious eye damage/eye irritation Category 2B Skin sensitization Not classified Germ cell mutagenicity Category 1B Carcinogenicity Category 1A Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 1 Flammable Liquids