Harmony; Primed MDF Mouldings

TLC Mouldings

Revision date : 2015-06-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

57-13-6

Name of the chemical

urea

Concentration

N/A

General Information

Revision date

2015-06-01

Product name

Harmony; Primed MDF Mouldings

1.2.1 Relevant identified uses

Architectural mouldings made from Medium Density Fiberboard (MDF) Material for decoration, furniture manufacturing, and in general purpose applications (non-load bearing applications). Primed mouldings are coated with a low VOC primer

Icons in SDS

Company Information

company name

TLC Mouldings

GHS Information

Signal word

DANGER

Section 2

SECTION 2: Hazards identification

29 CFR 1910.1200) Primed MDF mouldings are made up of the following: Identification Exposure Limit Hazardous Components CAS Number Proportion OSHA PEL ACGIH TLV MDF Board * N/A 90% - Low VOC Primer * N/A 2% - Moisture N/A 8% -

2.2 Label elements

OSHA HCS 2012 DANGER

Hazard statements

Does not present any significant danger; May cause skin irritation Does not present any significant danger; May cause an allergic skin reaction May cause eye irritation May cause respiratory irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause cancer via inhalation or respirable dust May form combustible dust concentrations in air

Precautionary statements

Obtain special instruction before use. Do not handle until all safety precautions have been read and understood. Do not breathe airborne dust. Contaminated work clothing should not be allowed out of the workplace. In case of inadequate ventilation, wear respiratory protection. Wash thoroughly after handling. Do not eat, drink, or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection.

Response

Actions IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. IF EXPERIENCING RESPIRATORY SYMPTOMS: Call a POISON CENTER or doctor. IF EXPOSED OR CONCERNED: Get medical advice/attention. Storage/Disposal: Store away from water and ignition sources. It is recommended to store the product in an area with relative humidity and temperature that approximates end use conditions. Dispose of content and/or container in accordance with local, regional, national, and/or international regulations.

2.3 Other hazards

OSHA HCS 2012 This product is not considered hazardous under the U.S. OSHA 29 CFR 1910.1200 Hazard Communication Standard.

Further information

NFPA: Health = 1, Flammability = 1, Reactivity = 0, Special Information = None HMIS: Health = 1*, Flammability = 1, Reactivity = 0, PPE = E

Health hazards

E = Safety Glasses, gloves, and a dust respirator

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.