Barracuda ply

Hazard statements (CLP)

H317, H334, H335, H350, H372

Code

Statements

H317

May cause an allergic skin reaction

2.1 Classification of the substance or mixture

Resp. Sens. 1 H334 Skin Sens. 1 H317 Carc. 1A H350 STOT SE 3 H335 STOT RE 1 H372 Comb. Dust

Hazard statements

see section 16 : May form combustible dust concentrations in air when further processed. H317 - May cause an allergic skin reaction. H334 - May cause an allergy or asthma symptoms or breathing difficulties if inhaled. H335 - May cause respiratory irritation. H350 - May cause cancer (Inhalation). H372 - Causes damage to organs (lung/respiratory system) through prolonged or repeated exposure (Inhalation).

2.2 Label elements

GHS-US Labeling

Hazard pictograms

GHS07 GHS08

Signal word

Danger

Precautionary statements

P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P260 - Do not breathe dust. P264 - Wash hands, forearms, and exposed areas thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing must not be allowed out of the workplace. P280 - Wear eye protection, protective clothing, protective gloves, respiratory protection. P284 - In case of inadequate ventilation, wear respiratory protection. P302+P352 - If on skin: Wash with plenty of soap and water. P304+P340 - If inhaled: Remove person to fresh air and keep at rest in a position comfortable for breathing. P304+P341 - If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. P314 - Get medical advice/attention if you feel unwell. P321 - Specific treatment (see section 4 on this SDS). P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P342+P311 - If experiencing respiratory symptoms: Call a poison center or doctor. P363 - Wash contaminated clothing before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container in accordance with local, regional, national, and international regulations.

Additional information

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Proper grounding procedures to avoid static electricity should be followed. Prevent dust accumulation (to minimize explosion hazard). Avoid generating dust.

2.3 Other hazards

Dust generated from material cutting may cause a slight irritation. Slivers may be generated, which could cause mechanical irritation or injure the eye. Exposure may aggravate pre-existing eye, skin, or respiratory conditions.

Ingredient(s) with unknown acute toxicity

No data available