AC Delco CVT Fluid, 12 x 1 Quart Case

2.2 Label elements

Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)

2.3 Other hazards

Not applicable

Other hazards

May be harmful if swallowed May be harmful in contact with skin Causes mild skin irritation Harmful to aquatic life 3.1 Substances Not applicable 3.2 Mixture The product contains no substances which at their given concentration, are considered to be hazardous to health

Non Hazardous Components

Chemical name CAS-No weight-% Lubricating Base Stocks Mixture 70-80 Synthetic Lubricant Mixture 5-10 Product containing mineral oil with less than 3% DMSO extract as measured by IP 346 4.1 First Aid Measures General Advice If symptoms persist, call a physician. Take a copy of the Safety Data Sheet when going for medical treatment. Skin Contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If skin irritation persists, call a physician. Eye Contact Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice or attention. Inhalation Move to fresh air in case of accidental inhalation of vapors. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Call a physician immediately. Ingestion Do not induce vomiting without medical advice. If vomiting occurs naturally, have casualty lean forward to reduce the risk of aspiration. If symptoms persist, call a physician. Protection of First-aiders Use personal protective equipment. Avoid contact with eyes, skin and clothing. 4.2 Most important symptoms and effects, both acute and delayed Symptoms See Section 11 for additional Toxicological information. 4.3 Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically. Flammable Properties NFPA: Class IIIB Combustible Liquid 5.1 Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment Unsuitable Extinguishing Media: Do not use a solid water stream as it may scatter and spread fire. 5.2 Specific Hazards Arising from the Chemical Keep product and empty container away from heat and sources of ignition. Hazardous combustion products During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and / or irritating. Combustion products may include and are not limited to: Carbon oxides Calcium Oxides (CaOx) Nitrogen oxides (NOx) Oxides of Phosphorus Sulphur oxides 5.3 Protective Equipment and Precautions for Firefighters: Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. 6.1 Personal precautions, protective equipment and emergency procedures Personal precautions Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists. Use personal protection recommended in Section 8. Ensure adequate ventilation. Remove all sources of ignition. 6.2. Environmental precautions Environmental Precautions See section 12 for additional ecological information. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Do not allow into any sewer, on the ground or into any body of water. Do not flush into surface water or sanitary sewer system. Large Spills: Dike far ahead of liquid spill for later recovery and disposal. Prevent entry into waterways, sewers, basements or confined areas. 6.3 Methods and material for containment and cleaning up Methods for Clean-up Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceus earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Spill Management LARGE SPILLS Eliminate sources of ignition. Prevent additional discharge of material if possible to do so without hazard. For small spills implement cleanup procedures; for large spills implement cleanup procedures and, if in public area, keep public away and advise authorities. WATER SPILLS Prevent liquid entering sewers, watercourses, or low areas. Contain spilled liquid with sand or earth. Recover by pumping or with suitable absorbent. If liquid is too viscous for pumping, scrape up. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations. 7.1. Precautions for safe handling Handling Do not breathe vapors, spray, or mist. Avoid contact with eyes, skin and clothing. Use personal protection recommended in the SDS. Remove and wash contaminated clothing before re-use. Keep away from open flames, hot surfaces and sources of ignition. Should not be released into the environment. Safe Handling Advice Handle in accordance with good industrial hygiene and safety practices. Take precautionary measures against static discharges. 7.2. Conditions for safe storage, including any incompatibilities

Storage

Keep in properly labeled containers. Keep container tightly closed in a dry and well-ventilated place. Technical measures/Precautions Ensure adequate ventilation. 8.1. Control parameters Exposure Guidelines Chemical name

Further information

DMSO extract by IP346 Less than 3.0 wt% (mineral oil component only) 10.1. Reactivity Reactivity The product is chemically stable. 10.2. Chemical stability Chemical Stability Stable under normal conditions. 10.3. Possibility of hazardous reactions Possibility of Hazardous Reactions None under normal processing. Hazardous Polymerization Hazardous polymerization does not occur. 10.4. Conditions to avoid Conditions to Avoid Heat, flames and sparks. 10.5. Incompatible materials Incompatible Materials Strong oxidizing agents 10.6. Hazardous decomposition products Hazardous decomposition products Thermal decomposition can lead to release of irritating gases and vapors. 11.1 Information on likely routes of exposure Inhalation May cause irritation of respiratory tract. Eye contact May cause slight irritation. Skin Contact May cause skin irritation and/or dermatitis. Ingestion May be harmful if swallowed. 11.2 Information on toxicological effects Symptoms No information available 11.3 Delayed and immediate effects as well as chronic effects from short and long-term exposure Skin corrosion/irritation Not classified. Serious eye damage/eye Not classified. irritation Sensitization Not classified. Mutagenic effects Not classified. Reproductive Toxicity Not classified STOT - single exposure Not classified. STOT - repeated exposure Not classified

Aspiration hazard

Not classified. 11.4 Carcinogenicity Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP, IARC or ACGIH Legend: NTP (National Toxicology Program), IARC (International Agency for Research on Cancer),

Product information

(Estimated) ATEmix (oral) > 5,000 mg/kg ATEmix (dermal) > 5,000 mg/kg ATEmix (inhalation-dust/mist) > 5 mg/l Component Information 12.1 Ecotoxicity Ecotoxicity effects Harmful to aquatic life. Plants and animals may experience harmful or fatal effects when coated with petroleum products. Petroleum-based (mineral) lubricating oils normally will float on water. In stagnant or slow-flowing waterways, an oil layer can cover a large surface area. As a result, this oil layer might limit or eliminate natural atmospheric oxygen transport into the water. With time, if not removed, oxygen depletion in the waterway may be sufficient to cause a fish kill or create an anaerobic environment. Chemical name 96h LC50 (fish - mg/L) 48h EC50 (daphnia - mg/L) 72h LC50 (algae - mg/L) (96HLCF) (48HLCD) (72HICA) Alkyl Phosphites 1.5 0.09 0.31 12.2 Persistence and degradability No information available. 12.3. Bioaccumulative potential No information available. 12.4 Mobility in Environmental Media No information available. 12.5 Other adverse effects: No information available. PBT and vPvB assessment No information available Hazard characteristic and regulatory waste stream classification can change with product use. Accordingly, it is the responsibility of the user to determine the proper storage, transportation, treatment and/or disposal methodologies for spent materials and residues at the time of disposition. Waste Disposal Method This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixed with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements. Contaminated packaging Dispose of in accordance with local regulations. Empty containers should be taken for local recycling, recovery or waste disposal. DOT Not regulated IATA Not regulated IMDG Not regulated International Inventories TSCA All ingredients are on the inventory or exempt from listing DSL/NDSL All ingredients are on the inventory or exempt from listing There are ingredients listed on the NDSL Inventory List Chemical name NDSL CAS-No weight-% Phenol, (tetrapropenyl) derivitives X 74499-35-7 <0.1 IECSC All ingredients are on the inventory or exempt from listing KECL All ingredients are on the inventory or exempt from listing PICCS All ingredients are on the inventory or exempt from listing AICS All ingredients are on the inventory or exempt from listing REACH To obtain information on the REACH compliance status of this product, please e-mail ila.sds@idemitsu.com Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AICS - Australian Inventory of Chemical Substances NZLOC - New Zealand Inventory of Chemicals REACH - Registration, Evaluation, Authorisation, and Restriction of Chemicals USA Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are above threshold values of the reporting requirements of this Act and Title 40 of the Code of Federal Regulations, Part 372 SARA 311/312 Hazardous Categorization Acute health hazard No Chronic Health Hazard No Fire hazard No Sudden Release of Pressure Hazard No Reactive Hazard No CERCLA/SARA 302 & 304 Section 302 & 304 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 355. Chemical name CAS-No weight-% RQ TPQ Methyl methacrylate 80-62-6 <0.1 RQ 1000lb final RQ RQ 454kg final RQ Alkyl alcohol 107-21-1 <0.01 RQ 5000lb final RQ RQ 2270kg final RQ Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61) This product does not contain any HAPs > 0.1%. State Regulations California Proposition 65 Label: WARNING Reproductive Harm - www.P65Warnings.ca.gov Chemical name CAS-No weight-% California Prop. Maximum Safe Harbor 65 Allowable Dose Limits for for Reproductive Cancer-causing