Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
40-70% 10-30%
EC/CAS
84-74-2
Name of the chemical
Dibutyl phthalate
Concentration
<15% 1-800-
General Information
Revision date
2020-12-01
Product name
ENDUROSET ESD2470 PART A (RESIN)
Chemical name
Isocyanate-terminated Prepolymer
supplier name
Thermoset Solutions, LLC
Icons in SDS
Company Information
company name
Thermoset Solutions, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@thermosetsolutions.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334, H335, H351, H360, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
OSHA HCS Classification
Health, Respiratory Sensitization, 1 Health, Skin Sensitization, 1 B Health, Skin corrosion/irritation, 2 Health, Carcinogenicity, 2 Health, Specific target organ toxicity – Repeated exposure, 2 Health, Serious Eye Damage/Eye Irritation, 2 B Health, Specific target organ toxicity – Single exposure, 3 Health, Acute toxicity, 4 Inhalation
Signal word
Danger
Hazard pictograms
Page: 1 / 7
Hazard statements
H334 – May cause allergy or asthma symptoms of breathing difficulties if inhaled. H317 – May cause an allergic skin reaction. H315 – Causes skin irritation. H351 – Suspected of causing cancer. H360 – May damage fertility or the unborn child. H373 – May cause damage to the respiratory system through prolonged or repeated exposure by inhalation. H320 – Causes eye irritation. H335 – May cause respiratory irritation. H332 – Harmful if inhaled.
Precautionary statements
P201 – Obtain special instructions before use. P202 – Do not handle until all safety precautions have been read and understood. P260 – Do not breathe fumes, mist and vapors. P264 – Wash skin and face thoroughly after handling. P271 – Use only outdoors or in a well ventilated area. P272 – Contaminated work clothing should not be allowed out of the workplace. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P281 – Use personal protective equipment as required. P284 – In case of inadequate ventilation, wear respiratory protection. P303+352 – IF ON SKIN (or hair): Wash with plenty of soap and water. P304+340 – IF INHALED: Remove person to fresh air and keep at rest in a position comfortable for breathing. P305+351+338 – IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P308+313 – IF exposed or concerned: Get medical advice/attention. P312 – Call a POISON CENTER or doctor/physician if you feel unwell. P314 – Get medical advice/attention if you feel unwell. P333+311 – If skin irritation occurs: Call a POISON CENTER or doctor/physician. P337+311 – If eye irritation persists: Call a POISON CENTER or doctor/physician. P342 – If experiencing respiratory symptoms: Call a doctor or emergency medical facility (i.e. 911) P362 – Take off contaminated clothing and wash before reuse. P403+233 – Store in a well ventilated place. Keep container tightly closed. P405 – Store locked up. P501 – Dispose of contents/container in accordance with federal/state/local regulations.
2.3 Other hazards
Contains isocyanates. Inhalation of isocyanate mists or vapors may cause respiratory irritation, breathlessness, chest discomfort and reduced pulmonary function. Overexposure well above the PEL may result in bronchitis, bronchial spasms and pulmonary edema. Long term exposure due to isocyanates has been reported to cause lung damage, including reduced lung function which may be permanent. Acute or chronic overexposure to isocyanates may cause sensitization in some individuals, resulting in allergic respiratory reactions including wheezing, shortness of breath, and difficulty breathing. Animal test indicate that skin contact may a role in causing respiratory sensitization.