Thermon T-802 Component J Heat Transfer Compound

Hazard statements (CLP)

H315, H317, H319, H335

Code

Statements

H315

Causes skin irritation

Classification (GHS-US)

Skin Irrit. 2 H315 Eye Irrit. 2A H319 Skin Sens. 1 H317 STOT SE 3 H335

2.2 Label elements

GHS US labelling

Signal word

Warning

Hazard statements

H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H335 - May cause respiratory irritation.

Precautionary statements

P261 - Avoid breathing vapours, dust. P264 - Wash hands, forearms and face thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing must not be allowed out of the workplace P280 - Wear protective gloves, eye protection, face protection, protective clothing P302+P352 - If on skin: Wash with plenty of soap and water P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P312 - Call a POISON CENTER, a doctor if you feel unwell P321 - Specific treatment (see first aid instructions on this label) P332+P313 - If skin irritation occurs: Get medical advice/attention. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P337+P313 - If eye irritation persists: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P363 - Wash contaminated clothing before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation 07/11/2019 Copyright ©Thermon, Inc.

Other hazards which do not result in classification

Hazards arising from this product are primarily present when product is in the uncured state. Once hardened, the compound is non-hazardous; however dust that may result from mechanical disturbance can be hazardous. Uncured product is a viscous paste composed of epoxy resin, hardener, and fillers (see detailed composition in Section 3). Product cures (hardens) when mixed with the T-802 component B. The reaction is exothermic and reaction does occur more rapidly upon exposure to heat. Product is packaged primarily in caulking tubes, but can be packaged in 1 gallon (3.8 L) or 5 gallon (18.9 L) quantities. 2.4.

Ingredient(s) with unknown acute toxicity

Not applicable