Thermon T-802 Component B Heat Transfer Compound

Thermon Manufacturing Company

Revision date : 2019-07-10

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

80-05-7

Name of the chemical

4,4'-isopropylidenediphenol

Concentration

N/A

EC/CAS

112-57-2

Name of the chemical

3,6,9-triazaundecamethylenediamine

Concentration

N/A

Listed in

EC/CAS

111-40-0

Name of the chemical

2,2'-iminodi(ethylamine)

Concentration

N/A

General Information

Revision date

2019-07-10

Product name

Thermon T-802 Component B Heat Transfer Compound

supplier name

Thermon Manufacturing Company

Emergency telephone

(713) 205-2690 (24 hours) Alternate National Poison Control Center 1 (800) 222-1222

Icons in SDS

Company Information

company name

Thermon Manufacturing Company

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H318, H334, H335, H361, H370, H372

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

Classification (GHS-US)

Skin Irrit. 2 H315 Eye Dam. 1 H318 Resp. Sens. 1 H334 Skin Sens. 1 H317 Repr. 2 H361 STOT SE 1 H370 STOT SE 3 H335 STOT RE 1 H372

2.2 Label elements

GHS US labelling

Signal word

Danger

Hazard statements

H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H318 - Causes serious eye damage. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 - May cause respiratory irritation. H361 - Suspected of damaging fertility or the unborn child. H370 - Causes damage to organs. H372 - Causes damage to organs through prolonged or repeated exposure.

Precautionary statements

P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P260 - Do not breathe vapours, dust. P261 - Avoid breathing vapours, dust. P264 - Wash hands, forearms and face thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing must not be allowed out of the workplace P280 - Wear eye protection, face protection, protective clothing, protective gloves P284 - [In case of inadequate ventilation] wear Wear respiratory protection.. P302+P352 - If on skin: Wash with plenty of soap and water P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P304+P341 - IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for 07/10/2019 Copyright ©Thermon, Inc. breathing P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P307+P311 - If exposed: Call a POISON CENTER/doctor P308+P313 - If exposed or concerned: Get medical advice/attention. P310 - Immediately call a doctor, a POISON CENTER P312 - Call a doctor, a poison center if you feel unwell P314 - Get medical advice/attention if you feel unwell. P321 - Specific treatment (see first aid instructions on this label) P332+P313 - If skin irritation occurs: Get medical advice/attention. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P342+P311 - If experiencing respiratory symptoms: Call a doctor, a POISON CENTER P362+P364 - Take off contaminated clothing and wash it before reuse. P363 - Wash contaminated clothing before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation

Other hazards which do not result in classification

Hazards arising from this product are primarily present when product is in the uncured state. Once hardened, the compound is non-hazardous; however dust that may result from mechanical disturbance can be hazardous. Uncured product is a viscous paste composed of epoxy resin, hardener, and fillers (see detailed composition in Section 3). Product cures (hardens) when mixed with the T-802 Component J. The reaction is exothermic and reaction does occur more rapidly upon exposure to heat. Product is packaged primarily in caulking tubes, but can be packaged in 1 gallon (3.8 L) or 5 gallon (18.9 L) quantities. 2.4.

Ingredient(s) with unknown acute toxicity

Not applicable

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.