Tin (II) chloride dihydrate

Hazard statements (CLP)

H290, H315, H317, H319, H332, H335, H341, H361, H373, H400, H410

Code

Statements

H290

May be corrosive to metals

SECTION 2: Hazards identification

Classified as hazardous according to criteria of Safe Work Australia. Classification under Safe Work Australia Classified as hazardous according to criteria of Safe Work Australia

Physical hazards

Substances/mixtures corrosive to metal Category 1

Health hazards

Acute Inhalation Toxicity - Dusts and Mists Category 4 Skin Corrosion/irritation Category 2 Serious Eye Damage/Eye Irritation Category 2 Skin Sensitization Category 1 Germ Cell Mutagenicity Category 2 Reproductive Toxicity Category 2 Specific target organ toxicity - (single exposure) Category 3 Specific target organ toxicity - (repeated exposure) Category 2 Corrosion

Environmental hazards

Acute aquatic toxicity Category 1 Chronic aquatic toxicity Category 1 Label Elements Exclamation Mark

Signal word

Danger Hazard Statements H290 - May be corrosive to metals H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H332 - Harmful if inhaled H335 - May cause respiratory irritation H341 - Suspected of causing genetic defects if inhaled H361 - Suspected of damaging fertility or the unborn child H373 - May cause damage to organs through prolonged or repeated exposure H400 - Very toxic to aquatic life H410 - Very toxic to aquatic life with long lasting effects

Precautionary statements

P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood P234 - Keep only in original container P264 - Wash face, hands and any exposed skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P272 - Contaminated work clothing should not be allowed out of the workplace P280 - Wear protective gloves/ protective clothing/ eye protection/ face protection P302 + P352 - IF ON SKIN: Wash with plenty of soap and water P304 + P340 - IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P308 + P313 - IF exposed or concerned: Get medical advice/ attention P362 - Take off contaminated clothing and wash before reuse P390 - Absorb spillage to prevent material damage P402 - Store in a dry place P403 + P233 - Store in a well-ventilated place. Keep container tightly closed P406 - Store in corrosive resistant polypropylene container with a resistant inliner P501 - Dispose of contents/ container to an approved waste disposal plant

Further information

No information available

2.1 Classification of the substance or mixture

Classified as hazardous according to criteria of Safe Work Australia Physical hazards Substances/mixtures corrosive to metal Category 1 Health hazards Acute Inhalation Toxicity - Dusts and Mists Category 4 Skin Corrosion/irritation Category 2 Serious Eye Damage/Eye Irritation Category 2 Skin Sensitization Category 1 Germ Cell Mutagenicity Category 2 Reproductive Toxicity Category 2 Specific target organ toxicity - (single exposure) Category 3 Specific target organ toxicity - (repeated exposure) Category 2 Environmental hazards Acute aquatic toxicity Category 1 Chronic aquatic toxicity