Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
75-07-0
Name of the chemical
Acetaldehyde
Concentration
N/A
EC/CAS
108-05-4
Name of the chemical
Vinylacetat (944/2013)
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
107-21-1
Name of the chemical
Ethane-1,2-diol
Concentration
N/A
General Information
Revision date
2015-10-26
Product name
G720 Simple Saver Air-Tight Sealant
Icons in SDS
Company Information
company name
Thermal Design, Inc
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) OSHA/HCS Status: This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). CARCINOGENICITY - Category 1A
2.1 Classification of the substance or mixture
Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 72.5%
Physical hazards
Not classified 0 Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Al- though HMIS® ratings are not required on SDSs under 29 CFR 1910.1200, the preparer may choose to provide them.
Signal word
Danger
Hazard statements
May cause eye/lung/ skin irritation. May cause Cancer. May cause genetic de- fects. May cause damage to organs through prolonged exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves / protective clothing / eye protection / face protection. Wash well after handling. Contaminated work cloth- ing should not be allowed out of work place.
Response
SKIN Wash with plenty of soap and water. If skin irritation or rash occurs Get medical attention / advice. Get medical attention / advice if you feel unwell. EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritant persists get medical attention / advice. If exposed or concerned: get medical attention or advice. Take off contaminated clothing and wash it before reuse.
Storage
Store locked up.
Disposal
Disposal of contents / container in accordance with local / regional /state / federal and international regulations.
2.3 Other hazards
HNOC): None known.
Additional information
Sanding and grinding dusts may be harmful if inhaled. This product contains Substance(s) formed under the conditions of use: Crystalline Silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Since this product is not meant to be sanded or sprayed, risk of exposure is considered low. Avoid contact with skin and cloth- ing. Wash thoroughly after handling. Emits toxic fumes when heated.
HMIS® ratings
Health: 2* Chronic effects Flammability: 1
