Note: Ingredients listed on restricted chemical lists
EC/CAS
1344-28-1
Name of the chemical
aluminium oxide
Concentration
01- 80-95 2119817795-27 01-
EC/CAS
1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
<20 2119448725-31
General Information
Revision date
2017-04-21
Product name
Tricoat PD,
1.2.1 Relevant identified uses
This product is a monolithic refractory used in lining industrial furnaces, high temperature processing, kilns and metal melting applications
Emergency telephone
+ 44 (0) 7931 963 973
Icons in SDS
Company Information
company name
THERMAL CERAMICS LIMITED
Section 2
CLP CLASSIFICATION
Not classified as hazardous according to Classification, Labelling and Packaging regulations (CLP) 1272/2008 EEC
2.2 Label elements
Not applicable
Other hazards which do not result in classification
Contains alkaline powder, which is irritating to skin and could cause damage to eyes. Mild mechanical irritation to skin, eyes and upper respiratory system may result from exposure to high dust concentrations of dried product. These effects are usually temporary. CHRONIC RESPIRATORY HEALTH EFFECTS These products may contain minimal amounts of crystalline silica. Prolonged/repeated inhalation of respirable crystalline silica dust may cause delayed lung injury (silicosis). IARC (International Agency for Research on Cancer) states that there is "sufficient evidence in humans for the carcinogenicity of inhaled crystalline silica in the form of quartz or cristobalite from occupational sources to classify crystalline silica as carcinogenic to humans (Group 1)" (Monograph V 68). In making the overall evaluation the Working Group noted however that carcinogenicity in humans was not detected in all industrial circumstances studied.
