SEAVOYAGE Copper Free Antifouling Paint Black

The Sherwin-Williams Company

Revision date : 2019-01-23

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS06 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

General Information

Revision date

2019-01-23

Product name

SEAVOYAGE Copper Free Antifouling Paint Black

1.2.1 Relevant identified uses

of the substance or mixture and

1.2.2. Uses advised against

Industrial use only

supplier name

The Sherwin-Williams Company

Emergency telephone

1-216-566-2917, +(61)290372994

Icons in SDS

GHS06 GHS08 T020 T024

Company Information

company name

The Sherwin-Williams Company

GHS Information

Signal word

DANGER

Section 2

SECTION 2: Hazards identification

Classification of the : FLAMMABLE LIQUIDS - Category 3 substance or mixture ACUTE TOXICITY (oral) - Category 3 ACUTE TOXICITY (inhalation) - Category 3 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1 SKIN SENSITIZATION - Category 1 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (central nervous system (CNS)) - Category 2

Signal word

DANGER

Hazard statements

Flammable liquid and vapor. Toxic if swallowed or if inhaled. Causes serious eye damage. Causes skin irritation. May cause an allergic skin reaction. May cause damage to organs through prolonged or repeated exposure. (central nervous system (CNS))

Precautionary statements

Date of issue/Date of revision : 23, January, 2019 Date of previous issue :17, January, 2019 Version :4 1/13 Section 4. First aid measures Inhalation Get medical attention immediately. Call a poison center or physician. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. Skin contact Get medical attention immediately. Call a poison center or physician. Wash with plenty of soap and water, Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 15 minutes. Chemical burns must be treated promptly by a physician. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse. Ingestion Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Chemical burns must be treated promptly by a physician. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. M importan mptoms/eff acute and delayed

Potential Acute Health Effects

Eye contact Causes serious eye damage. Inhalation Toxic if inhaled. Skin contact : Causes skin irritation. May cause an allergic skin reaction. Ingestion Toxic if swallowed. Over-exposure signs/symptoms Eye contact : Adverse symptoms may include the following: pain watering redness Inhalation No specific data. Skin contact : Adverse symptoms may include the following: pain or irritation redness blistering may occur Ingestion : Adverse symptoms may include the following: stomach pains indication of immediate medical attention and special treatment needed, if necessary Notes to physician Incase of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. Specific treatments No specific treatment. Protection of first-aiders No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Date of issue/Date of revision : 23, January, 2019 :4 Date of previous issue 3/13 217, January, 2019 Version Section 6. Accidental release measures Large spill Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non- combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. Section 7. Handling and storage Precautions for safe handling Protective measures Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges. Empty containers retain product residue and can be hazardous. Do not reuse container. Advice on general Eating, drinking and smoking should be prohibited in areas where this material is occupational hygiene handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures. Conditions for safe storage, Store in accordance with local regulations. Store in a segregated and approved including any area. Store in original container protected from direct sunlight in a dry, cool and well- incompatibilities ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use. Avoid release to the environment. Section 8. Exposure controls and personal protection Control parameters Occupational exposure limits Ingredient name Exposure limits Rosin ACGIH TLV (United States, 3/2018). Skin “| sensitizer. Inhalation sensitizer. 1,2,4-Trimethylbenzene Safe Work Australia (Australia, 4/2018). TWA: 123 mg/m® 8 hours. TWA: 25 ppm 8 hours. Zinc Pyrithione DFG MAC-values list (Germany, 7/2017). Absorbed through skin. Xylene, mixed isomers Safe Work Australia (Australia, 4/2018). STEL: 655 mg/m? 15 minutes. STEL: 150 ppm 15 minutes. TWA: 350 mg/m? 8 hours. TWA: 80 ppm 8 hours. 1,3,5-Trimethylbenzene Safe Work Australia (Australia, 4/2018). TWA: 123 mg/m? 8 hours. Date of issue/Date of revision : 23, January, 2019 Date of previous issue :17, January, 2019 Version :4 5/13 Section 9. Physical and chemical properties Appearance Physical state Liquid. Color Not available. Odor Not available. Odor threshold Not available. pH Not available. Melting point Not available. Boiling point > 138°C (280.4°F) Flash point Closed cup: 39°C (102.2°F) [Pensky-Martens Closed Cup] Evaporation rate 0.53 (butyl acetate = 1) Flammability (solid, gas) Not available. Lower and upper explosive Lower: 0.7% (flammable) limits Upper: 7% Vapor pressure 1.3 kPa (10 mm Hg) [at 20°C] Vapor density 3.66 [Air = 1] Relative density ; “1.538 Solubility Not available.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.