LOXON XP Waterproofing Masonry Coating, Extra White

Hazard statements (CLP)

H303, H315

Code

Statements

H303

May be harmful if swallowed

SECTION 2: Hazards identification

HMIS CODES

INHALATION of vapor or spray mist. Health 1* EYE or SKIN contact with the product, vapor or spray mist. Flammability 0 EFFECTS OF OVEREXPOSURE Reactivity 0 EYES: Irritation. SKIN: Prolonged or repeated exposure may cause irritation. INHALATION: Irritation of the upper respiratory system. In a confined area vapors in high concentration may cause headache, nausea or dizziness. SIGNS AND SYMPTOMS OF OVEREXPOSURE Redness and itching or burning sensation may indicate eye or excessive skin exposure.

Medical Conditions Generally Aggravated by Exposure

None generally recognized. None Known.

Cancer information

For complete discussion of toxicology data refer to Section 11. SECTION 4 — FIRST AID MEASURES EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention. SKIN: Wash affected area thoroughly with soap and water. Remove contaminated clothing and launder before re-use. INHALATION: If affected, remove from exposure. Restore breathing. Keep warm and quiet. INGESTION: Do not induce vomiting. Get medical attention immediately. SECTION 5 — FIRE FIGHTING MEASURES FLASH POINT LEL UEL FLAMMABILITY CLASSIFICATION Not Applicable Not Not Applicable Applicable EXTINGUISHING MEDIA Carbon Dioxide, Dry Chemical, Alcohol Foam UNUSUAL FIRE AND EXPLOSION HAZARDS Closed containers may explode (due to the build-up of pressure) when exposed to extreme heat. During emergency conditions overexposure to decomposition products may cause a health hazard. Symptoms may not be immediately apparent. Obtain medical attention. SPECIAL FIRE FIGHTING PROCEDURES Full protective equipment including self-contained breathing apparatus should be used. Water spray may be ineffective. If water is used, fog nozzles are preferable. Water may be used to cool closed containers to prevent pressure build-up and possible autoignition or explosion when exposed to extreme heat. SECTION 6 — ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED Remove all sources of ignition. Ventilate the area. Remove with inert absorbent. SECTION 7 — HANDLING AND STORAGE STORAGE CATEGORY Not Applicable PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE Keep container closed when not in use. Transfer only to approved containers with complete and appropriate labeling. Do not take internally. Keep out of the reach of children. SECTION 8 — EXPOSURE CONTROLS/PERSONAL PROTECTION PRECAUTIONS TO BE TAKEN IN USE Use only with adequate ventilation. Avoid contact with skin and eyes. Avoid breathing vapor and spray mist. Wash hands after using. This coating may contain materials classified as nuisance particulates (listed "as Dust" in Section 2) which may be present at hazardous levels only during sanding or abrading of the dried film. If no specific dusts are listed in Section 2, the applicable limits for nuisance dusts

Hazardous Ingredients

requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. VENTILATION Local exhaust preferable. General exhaust acceptable if the exposure to materials in Section 2 is maintained below applicable exposure

Health hazards

Crystalline Silica (Quartz, Cristobalite) is listed by IARC and NTP. Long term exposure to high levels of silica dust, which can occur only when sanding or abrading the dry film, may cause lung damage (silicosis) and possibly cancer. IARC's Monograph No. 93 reports there is sufficient evidence of carcinogenicity in experimental rats exposed to titanium dioxide but inadequate evidence for carcinogenicity in humans and has assigned a Group 2B rating. In addition, the IARC summary concludes, "No significant exposure to titanium dioxide is thought to occur during the use of products in which titanium is bound to other materials, such as paint." TOXICOLOGY DATA CAS No. Ingredient Name 14808-60-7 Quartz LC50 RAT 4HR Not Available LD50 RAT Not Available 13463-67-7 Titanium Dioxide LC50 RAT 4HR Not Available LD50 RAT Not Available 1314-13-2 Zinc Oxide LC50 RAT 4HR Not Available LD50 RAT Not Available

TOXICOLOGICAL INFORMATION

No data available. SECTION 13 — DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD Waste from this product is not hazardous as defined under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261. Incinerate in approved facility. Do not incinerate closed container. Dispose of in accordance with Federal, State/Provincial, and Local regulations regarding pollution. SECTION 14 — TRANSPORT INFORMATION Multi-modal shipping descriptions are provided for informational purposes and do not consider container sizes. The presence of a shipping description for a particular mode of transport (ocean, air, etc.), does not indicate that the product is packaged suitably for that mode of transport. All packaging must be reviewed for suitability prior to shipment, and compliance with the applicable regulations is the sole responsibility of the person offering the product for transport. US Ground (DOT) Not Regulated for Transportation. Canada (TDG) Not Regulated for Transportation. IMO Not Regulated for Transportation. IATA/ICAO Not Regulated for Transportation. SECTION 15 — REGULATORY INFORMATION SARA 313 (40 CFR 372.65C) SUPPLIER NOTIFICATION CAS No. CHEMICAL/COMPOUND % by WT % Element Zinc Compound 2 1.7

Further information

This product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. The above information pertains to this product as currently formulated, and is based on the information available at this time. Addition of reducers or other additives to this product may substantially alter the composition and hazards of the product. Since conditions of use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Material Safety Data Sheet _______________________________________________ Revision Date: 21-Mar-2014 1. CHEMICAL PRODUCT AND COMPANY INFORMATION Product code 90400 Product name LPA II Recommended Use Lubricant Supplier Lawson Products, Inc. 8770 W.Bryn Mawr Ave.- Suite 900 Chicago, IL 60631 1-866-529-7664 Emergency telephone number (888) 426-4851 Emergency Overview Extremely flammable. Contents under pressure. Irritant. Harmful by inhalation.

Principle Routes of Exposure

Inhalation. Eyes. Skin contact.

Potential health effects

Eyes May cause the following effects:. Irritation. Redness. Itching. Burning sensation. Skin Repeated or prolonged exposure may cause:. Skin Irritation. Redness. Itching. Burning sensation. Inhalation Repeated or prolonged exposure may cause the following effects:. Upper respiratory tract irritation. Headaches. Dizziness. Nausea. Loss of coordination. Extreme overexposure may cause. Central nervous system depression. Possible unconsciousness. Death. Misuse by deliberately concentrating vapors and inhaling contents can be harmful or fatal. Ingestion May be harmful if swallowed.