ANCHORING EPOXY - FASTSET (PART B)

SECTION 2: Hazards identification

Hazard-determining components of labeling Classification of the substance or mixture Skin Corrosion– Category 1B Eye Damage – Category 1 Skin Sensitization – Category 1 Carcinogenicity – Category 1A Toxic to Reproduction (Fertility) – Category 1B Toxic to Reproduction (Unborn Child) – Category 1B Specific Target Organ Toxicity (Repeated Exposure) – Category 1 (lungs/respiratory tract) Aquatic Hazard (Acute) – Category 1 Aquatic Hazard (Long Term) – Category 1 2.2a Signal word Danger 2.2b Hazard Statements Causes severe skin burns and eye damage May cause an allergic skin reaction May cause cancer May damage fertility or the unborn child Causes damage to organs through prolonged or repeated exposure (lungs, respiratory tract) Very toxic to aquatic life with long lasting effects 2.2c Pictograms 2.2d Precautionary statements Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid contact with the skin and eyes Avoid breathing fumes Avoid exposure during pregnancy. Wear protective gloves, eye protection and clothing. Do not eat, drink or smoke when using this product. If on skin (or hair): Remove material immediately! Cured material can be removed only mechanically with damage to skin. Immediately wash all contaminated body and clothing thoroughly. If in eyes: Immediately rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing and seek medical immediate attention. If inhaled: remover person to fresh air and keep comfortable for breathing. If swallowed: immediately call a poison control center or physician. Rinse mouth. Do NOT induce vomiting. If you experience a burn, rash or skin irritation: immediately seek medical attention. Immediately seek medical attention if symptoms are significant or persist. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/containers in accordance with all regulations.

Additional information

Carcinogenicity & Teratogenicity This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long- term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. Note: sanding of this product will create a possible dust hazard. This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. Note: sanding of this product will create a possible silica dust hazard This product contains 2-(2-Aminoethylamino) ethanol which is not listed by the State of California for reproductive toxicity. The US National Institute of Health identifies this constituent as it may damage fertility or the unborn child. 2.3a HNOC – Hazards not otherwise classified: Not applicable 2.3b Unknown Acute Toxicity: None known SECTION III - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

2.1 Classification of the substance or mixture

2.1 Classification of the substance or mixture Skin Corrosion– Category 1B Eye Damage – Category 1 Skin Sensitization – Category 1 Carcinogenicity – Category 1A Toxic to Reproduction (Fertility) – Category 1B Toxic to Reproduction (Unborn Child) – Category 1B Specific Target Organ Toxicity (Repeated Exposure) – Category 1 (lungs/respiratory tract) Aquatic Hazard (Acute) – Category 1 Aquatic Hazard (Long Term) – Category 1 2.2a Signal word Danger