Note: Ingredients listed on restricted chemical lists
EC/CAS
68410-97-9
Name of the chemical
Distillates (petroleum), light distillate hydrotreating process, low-boiling
Concentration
≥10-≤30
EC/CAS
110-82-7
Name of the chemical
Cyclohexane
Concentration
≥3-≤7
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
≥0.1-≤1
EC/CAS
110-54-3
Name of the chemical
n-Hexan (790/2009)
Concentration
≥0.1-≤1
EC/CAS
14464-46-1
Name of the chemical
Cristobalit (s. u. TRGS 906)
Concentration
≥0.1-≤1
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥0.1-≤1
General Information
Version
1.06
Revision date
2026-05-20
Product name
LNP-601 LIQUID NAILS PROJECTS INTERIOR CONSTRUCTION ADHESIVE SOLVENT-BASED TAN
1.2.1 Relevant identified uses
Consumer applications, Professional applications
Manufacturer Name
The Pittsburgh Paints Co
Emergency telephone
1-833-477-1553, 1-800-441-9695, 1-800-387-2253
Icons in SDS
Company Information
company name
The Pittsburgh Paints Co
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H224, H340, H350, H361, H373
Hazard statements
Code
Statements
H224
Extremely flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
9% (oral), 96.9% (dermal), 42.8% (inhalation)
Signal word
Danger
Hazard statements
Extremely flammable liquid and vapor. May cause genetic defects. May cause cancer. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe vapor.
Response
IF exposed or concerned Get medical advice or attention. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water.
Storage
Store locked up. Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
GERM CELL MUTAGENICITY - Category 1 CARCINOGENICITY - Category 1A TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 9% (oral), 96.9% (dermal), 42.8% (inhalation)