Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-48-9
Name of the chemical
Naphtha (petroleum), hydrotreated heavy
Concentration
≥10-<20
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<1.0
EC/CAS
136-52-7
Name of the chemical
Cobalt bis(2-ethylhexanoate)
Concentration
<1.0
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
<1.0
General Information
Version
24.01
Revision date
2025-07-07
Product name
7-LINE INT/EXT GLOSS ALKYD DEEP RUSTIC BASE
1.2.1 Relevant identified uses
Consumer applications, Professional applications
Manufacturer Name
The Pittsburgh Paints Co
Emergency telephone
1-833-477-1553, 1-800-441-9695, 1-800-387-2253
Icons in SDS
Company Information
company name
The Pittsburgh Paints Co
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H317, H319, H350, H360
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
38.4% (oral), 78.8% (dermal), 65% (inhalation)
Signal word
Danger
Hazard statements
Flammable liquid and vapor. May cause an allergic skin reaction. Causes serious eye irritation. May cause cancer. May damage fertility or the unborn child.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Keep container tightly closed. Avoid breathing vapor. Wash thoroughly after handling.
Response
IF exposed or concerned Get medical advice or attention. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation or rash occurs: Get medical advice or attention. Wash contaminated clothing before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up. Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. DANGER - RAGS, STEEL WOOL OR WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED WATER-FILLED METAL CONTAINER.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1 CARCINOGENICITY - Category 1A TOXIC TO REPRODUCTION - Category 1B Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 38.4% (oral), 78.8% (dermal), 65% (inhalation)
