Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
EC/CAS
231-072-3
Name of the chemical
Aluminium
Concentration
N/A
General Information
Product name
WELDTEK 535 ALUMINUM PN: 46034
supplier name
31 WASHINGTON AVE
Manufacturer Name
THE MAINTENANCE CONNECTION
Emergency telephone
1-800-535-5053
Icons in SDS
Company Information
company name
THE MAINTENANCE CONNECTION
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 EMERGENCY OVERVIEW Chemically stable and inert. Does not pose a fire hazard as shipped. Non-Flammable Flames used for soldering can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. In case of fire, use NIOSH/MSHA self contained breathing apparatus.
Principle Routes of Exposure
Primary route of entry is the respiratory system. Other possible routes are eyes and/or skin contact
Potential health effects
EYES: Inert foreign body hazard only. SKIN: Rashes/irritations due to drying of the skin and/or mechanical abrasion related to skin-to-clothing contact or skin-to-skin contact. Spatter and flames and heat from soldering may cause burns. INGESTION: Not an expected route of entry, but if ingested product could cause serious injury. INHALATION: Danger of serious damage to health by prolonged exposure through inhalation. WARNING: This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and/or cancer. (California Health & Safety Code 25249.5 et seq.). WARNING: avoid breathing welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. CARCINOGENICITY WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. GHS: not applicable
Precautionary statements
S53 Avoid exposure - obtain special instructions before use. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Package Labeling: The product does not require a hazard warning label in accordance with EC directives/the relevant national laws. Although this product does not require a hazard warning label, we recommend that the safety advice should be observed. P285 In case of inadequate ventilation wear respiratory protection P314 Get medical advice if you do not feel well P280 Wear protective gloves/protective clothing/eye protection/face protection P202 Do not handle until all safety precautions have been read and understood P260 Do not breathe dust/fume/gas/mist/vapors/spray P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions.