Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
1-<5%
EC/CAS
1304-28-5
Name of the chemical
Barium oxide, obtained by calcining witherite
Concentration
0.1-<1%
EC/CAS
16871-90-2
Name of the chemical
Dipotassium hexafluorosilicate
Concentration
0.1-<1%
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
0.1-<1%
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
0.1-<1%
EC/CAS
1305-78-8
Name of the chemical
Calcium oxide
Concentration
0.1-<1%
General Information
Version
5.0
Revision date
2025-04-09
Product name
Pipeliner NR-208-XP PREFAB 2.0MM
1.2.1 Relevant identified uses
Reserved for industrial and professional use
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
The Lincoln Electric Company
GHS Information
Signal word
No signal word
Section 2
SECTION 2: Hazards identification
Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Emergency Overview Form Solid Physical state Solid
Hazard statements
Welding arc and sparks can ignite combustible and flammable products. Arc rays can injure eyes and burn skin. Electric shock can kill. Hazard Classification Not classified as hazardous according to applicable GHS hazard classification criteria Not applicable
Hazard pictograms
No symbol
Signal word
No signal word.
Precautionary statements
Not applicable
Other hazards which do not result in classification
Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8.
2.1 Classification of the substance or mixture
Not classified as hazardous according to applicable GHS hazard classification criteria.
