Paste Flux

Hazard statements (CLP)

H314, H410

Code

Statements

H314

Causes severe skin burns and eye damage

SECTION 2: Hazards identification

Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace. Hazard Classification Health Hazards Skin Corrosion/Irritation Category 1 Serious Eye Damage/Eye Irritation Category 1 Environmental Hazards Acute hazards to the aquatic Category 1

Environmental hazards

Chronic hazards to the aquatic Category 1

Signal word

Danger

Hazard statements

Causes severe skin burns and eye damage. Very toxic to aquatic life with long lasting effects.

Prevention

Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.

Response

IF SWALLOWED Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Wash contaminated clothing before reuse. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Collect spillage.

Storage

Store locked up.

Disposal

Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.

Other hazards which do not result in classification

Overexposure to fumes and gases from the solder and/or flux material can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical Identity Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Skin Corrosion/Irritation Category 1 Serious Eye Damage/Eye Irritation Category 1 Environmental Hazards Acute hazards to the aquatic Category 1 environment Chronic hazards to the aquatic Category 1 environment