Bridgit Paste Flux

SECTION 2: Hazards identification

result in GHS classification: Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace.

Health hazards

Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1B Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 2 Repeated Exposure

Environmental hazards

Acute hazards to the aquatic Category 1 Chronic hazards to the aquatic Category 1

Signal word

Danger

Hazard statements

Harmful if swallowed. Causes severe skin burns and eye damage. May cause damage to organs Kidney through prolonged or repeated exposure. Very toxic to aquatic life with long lasting effects.

Prevention

Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/ protective clothing/ eye protection/ face protection.

Response

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/ physician if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Wash contaminated clothing before reuse. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention if you feel unwell. Collect spillage.

Storage

Store locked up.

Disposal

Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations. Other hazards which do not Overexposure to fumes and gases from the solder and/or flux material can result in GHS classification be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical Identity Carbon dioxide CAS-No. 124-38-9 Carbon monoxide Nitrogen dioxide Ozone 630-08-0 10102-44-0 10028-15-6