Lincolnweld 781 B&W

Hazard statements (CLP)

H316, H351, H373, H402

Code

Statements

H316

Causes mild skin irritation

SECTION 2: Hazards identification

Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). The product contains less than 0.1% of respirable crystalline silica. Emergency Overview Form Granular Physical state Solid

Hazard statements

Welding arc and sparks can ignite combustible and flammable products. Arc rays can injure eyes and burn skin. Electric shock can kill. Hazard Classification Health Hazards Skin Corrosion/Irritation Category 3 Carcinogenicity Category 2 Specific Target Organ Toxicity - Category 2 Repeated Exposure Causes mild skin irritation. Suspected of causing cancer. May cause damage to organs Nervous System through prolonged or repeated exposure. Harmful to aquatic life.

Environmental hazards

Acute hazards to the aquatic Category 3

Signal word

Warning

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.

Response

If skin irritation occurs: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention.

Storage

Store locked up.

Disposal

Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

Other hazards which do not result in classification

Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the The welding fume produced from this welding electrode may contain the conditions of use following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical Identity CAS-No. Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone 124-38-9 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Skin Corrosion/Irritation Category 3 Carcinogenicity Category 2 Specific Target Organ Toxicity - Category 2 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 3 environment