Note: Ingredients listed on restricted chemical lists
EC/CAS
107-21-1
Name of the chemical
Ethane-1,2-diol
Concentration
10-<20%
General Information
Version
4.1
Revision date
2025-10-07
Product name
Flux Paste Petroleum Base
1.2.1 Relevant identified uses
Metal Soldering
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
The Lincoln Electric Company
e-mail address of the competent person responsible for the Safety Data Sheet
SDS@lincolnelectric.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H314, H373, H410
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Emergency Overview Form Paste Physical state Paste
Hazard statements
Open flames or hot surfaces from brazing or soldering operations can ignite combustible and flammable materials. Hazard Classification Harmful if swallowed. Causes severe skin burns and eye damage. May cause damage to organs Kidney through prolonged or repeated exposure. Very toxic to aquatic life with long lasting effects.
Health hazards
Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1 Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 2 Repeated Exposure
Environmental hazards
Acute hazards to the aquatic Category 1 Chronic hazards to the aquatic Category 1
Signal word
Danger
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/ physician if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Wash contaminated clothing before reuse. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention if you feel unwell. Collect spillage.
Storage
Store locked up.
Disposal
Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.
Other hazards which do not result in classification
None. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical Identity Carbon dioxide CAS-No. 124-38-9 Carbon monoxide Nitrogen dioxide Ozone 630-08-0 10102-44-0 10028-15-6
2.1 Classification of the substance or mixture
Health Hazards Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1 Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 2 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 1 environment Chronic hazards to the aquatic Category 1 environment
