INDALLOY WITH LEAD AND/OR TIN SILVER, COPPER

Hazard statements (CLP)

H303, H351, H361, H373, H410

Code

Statements

H303

May be harmful if swallowed

Principle Routes of Exposure

CARCINOGEN LISTED IN: ⊗Eye ⊗Inhalation ⊗Skin ⊗Ingestion NTP IARC OSHA ⊗Not Listed See Section 11 GHS

Hazard statements

H303 May be harmful if swallowed H351 Suspected of causing cancer (lead) H361 Suspected of damaging fertility or the unborn child (lead) H373 May cause damage to organs through prolonged or repeated exposure (lead) H410 Very toxic to aquatic life with long lasting effects (lead) EUH201A Warning! Contains lead (applicable only to the products listed that contain lead) Review listing.

Precautionary statements

P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapors/spray P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 Take off contaminated clothing and wash before reuse P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) -----------------------------------------------------------------------------------------------------------------------------------------------------------------

2.1 Classification of the substance or mixture

Acute toxicity, Oral (Category 4) (lead) Carcinogenicity (Category 2) (lead) Reproductive toxicity (Category 2) (lead) Specific target organ toxicity-repeated exposure-Category 2 (lead) Acute aquatic toxicity (Category 1) (lead) Chronic aquatic toxicity (Category 1) (lead)

Potential health effects

Eye Contact: Contact with powered metal alloy or fume from molten metal may cause irritation. Severe eye damage may result from hot molten metal being splashed into the eyes. Wear safety glasses and face shield when working with molten metal, cutting or grinding. Ingestion: Ingestion of dust may cause headache, nausea, abdominal pain, fatigue and pain in the legs, arms and joints. May be harmful if swallowed. Inhalation: Inhalation of fume or dust may cause local irritation to the respiratory system. Inhalation of fume or dust may cause headache, nausea, abdominal pain, fatigue and pain in the legs, arms and joints. Normal handling of solid form has no inhalation issues. Skin Contact: Normal handling of solid form should not cause any adverse health effects. Powder form may cause skin irritation. Hot molten metal may cause burns to the skin. Wear protective equipment when handling molten metal. Chronic: LEAD: Prolonged exposure to vapors or fumes at higher temperatures may cause respiratory irritation and systematic lead poisoning. Symptoms of lead poisoning include headache, nausea, abdominal pain, muscle and joint pain and damage to the nervous system, blood system and kidneys. SILVER: Chronic skin contact or ingestion of silver powder, salts or fume can result in a condition known as Argyria, a condition with bluish pigmentation of the skin and eyes. TIN: Has been shown to increase incidence of sarcoma in animal tests. COPPER: Overexposure to fumes may cause metal fume fever (chills, muscle aches, nausea, fever; dry throat, cough, weakness, lassitude); metallic or sweet taste; discoloration of skin and hair. WARNING: Applicable in the State of California. This product contains a chemical known to the State of California to cause cancer and/or birth defects (or other reproductive harm). (lead) NOTE: The Indium Corporation does not recommend, manufacturer, market or endorse any of its products for human consumption. WARNING: This product may contain lead. Lead may be harmful to your health. US Federal law prohibits the use of leaded solders in making joints or fittings in any private or public water supply system. Keep out of the reach of children. ALLOY MIXTURE TABLE INDALLOY %TIN %LEAD %COPPER %SILVER LIQUIDUS DENSITY RoHS 2 oC/ oF (gm/cm3) Compliance** (METAL Sn Pb Cu Ag MIX) 100 62.6 37 - 0.4 182C/361F 8.40 NO 104 62.5 36.1 - 1.4 179C/354F 8.41 NO 62 36 - 2 8.42 NO 115 44 55 - 1 210C/410F 9.11 NO 127 37 60 - 3 232C/450F 9.39 NO 137 61.5 35.5 - 3 189C/372F 8.43 NO 142 50 47 - 3 260C/500F 8.86 NO 151 5 92.5 - 2.5 296C/565F 11.02 YES^ 154 40 57 - 3 289C/552F 9.26 NO 155 5 90 - 5 292C/558F 11.00 YES^ 161 - 97.5 - 2.5 303/577 11.33 YES^ 163 2 95.5 - 2.5 304C/579F 11.20 YES^ 165 1 97.5 - 1.5 309C/588F 11.28 YES^ 175 - 95 - 5 364C/687F 11.30 YES^ 210 27 70 - 3 253C/487F 9.84 NO 228 10 88 - 2 299C/570F 10.75 YES^ 229 - 94.5 - 5.5 365C/689 11.35 YES^ INDALLOY %TIN %LEAD %COPPER %SILVER LIQUIDUS DENSITY RoHS 2 oC/ oF (gm/cm3) Compliance** (METAL Sn Pb Cu Ag MIX) NON STANDARD ALLOY MIXTURES NS 1 97 - 2 - 11.28 YES^ NS 1 98 - 1 - 11.28 YES NS 3.9 95.5 - 0.6 - 11.10 YES^ NS 5 93.5 - 1.5 - 11.03 YES NS 15 82.7 - - 9.39 NO NS 20 77 - 3 - 10.19 NO NS 45 54 - 1 - 9.06 NO NS 59 40 - 1 - 8.53 NO NS 60 38 - 2 - 8.41 NO NS 60 38 2 - 8.47 NO NS 60 36 - 4 - 8.41 NO NS 61.5 36 2.5 - 8.40 NO NS 62.5 36 - 1.5 8.40 NO NS 64 34 - 2 8.35 NO NS 78.4 20 0.2 1.4 - 7.88 NO NS 92 5 0.4 2.6 - 7.48 NO NS 95.6 1 0.5 2.9 - 7.38 NO NS - 96.5 - 3.5 - 11.32 YES^ NS - 96 - 4 - 11.31 YES^ NS 3 96 1 11.15 YES’ NS = Non Standard alloy mixtures ** READ BELOW **RoHS 2 =Restriction of Hazardous Substances (review applicable exemptions) EU Directive 2011/65/EU. Review any applicable exemptions that may apply for lead^ containing. It is the responsibility of the customer to determine compliance with RoHS^ if taking the lead exemption for high melting lead, otherwise follow company guidelines. This is not a decision for Indium Corporation to make. http://www.indium.com