Note: Ingredients listed on restricted chemical lists
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-146-5/7440-36-0
Name of the chemical
Antimony
Concentration
N/A
EC/CAS
7440-48-4
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
N/A
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
5.0-6.0
General Information
Version
1.1
Revision date
2020-08-11
Product name
INDALLOY WITH INDIUM 10.1HFE
1.2.1 Relevant identified uses
Industrial Use -No-clean solder paste consisting of a flux vehicle blended with an 83-92 % pre- alloyed metal powder used for solder applications. (mixture) See alloy table for metal combinations with the same flux Review alloy table for all metal combinations with the same flux
Emergency telephone
1 (800) 424-9300, +1 (703) 527-3887, +33 (0) 1 45 42 59 59, +1-800-448-9240
Icons in SDS
Company Information
company name
The Indium Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
nswarts@indium.com, aday@indium.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H320, H334
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Principle Routes of Exposure
CARCINOGEN LISTED IN: Eye Inhalation Skin Ingestion NTP IARC
Hazard statements
H317 May cause an allergic skin reaction H320 Causes eye irritation H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
Precautionary statements
P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapors/spray P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 +P364 Take off contaminated clothing and wash before reuse P301 + P314 IF SWALLOWED: Get Medical advice/attention if you feel unwell. P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) P501 Dispose of content via approved waste handling or recycle if possible. Other: EUH208 Contains rosin. May produce an allergic reaction -------------------------------------------------------------------------------------------------------------------------------------------------------------
Potential health effects
Eye Contact: Contact with material at room temperature or fume from material at typical re-flow temperatures over 100°C may cause eye irritation. Ingestion: This product contains metal alloy powders and chemicals. May be harmful. Inhalation: Vapors or fumes from this material at typical re-flow temperatures over 100°C may cause irritation to the respiratory system. May be harmful, if inhaled. Inhalation of rosin fume may cause occupational asthma. Skin Contact: May cause skin irritation. Rosin may cause dermatitis and product may cause skin sensitization. Chronic: SILVER: Chronic skin contact or ingestion of silver powder, salts or fume can result in a condition known as Argyria, a condition with bluish pigmentation of the skin and eyes. TIN: Has been shown to increase incidence of sarcoma in animal tests. COPPER: Overexposure to fumes of copper may cause metal fume fever (chills, muscle aches, nausea, fever; dry throat, cough, weakness, lassitude); metallic or sweet taste; discoloration of skin and hair. ANTIMONY: May be harmful if inhaled. May cause respiratory irritation. Note: The Indium Corporation does not recommend, manufacture, market or endorse any of its products for human consumption.
2.1 Classification of the substance or mixture
Classification: Eye Irritant (Category 2) Sensitization, skin (Category 1B) Sensitization, respiratory (Category 1B)
