Note: Ingredients listed on restricted chemical lists
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Tin
Concentration
80-88 2.5-2.76
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0.42-0.46 4.0-6.0
EC/CAS
205-594-7/143-24-8
Name of the chemical
Bis(2-(2-methoxyethoxy)ethyl)ether; Tetraethylenglycoldimethylether (2020/1182)
Concentration
N/A
General Information
Revision date
2021-04-05
Product name
INDALLOY 256 (SAC305) WITH INDIUM8.9HF SOLDER PASTE
1.2.1 Relevant identified uses
Industrial Use (Mixture) - Solder paste consisting of a flux vehicle blended with 83 - 92 weight percent pre-alloyed metal powder used for soldering applications
Emergency telephone
1 (800) 424-9300, +1 (703) 527-3887, +1-800-448-9240, 33-975181407, +33 (0) 1 45 42 59 59, 49-69643508409, 800-789-767, 48-223988029, 351-308801773, 40-37-6300026, 44-870-8200418, 44-2038073798
Icons in SDS
Company Information
company name
The Indium Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
nswarts@indium.com, aday@indium.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H319, H334, H360
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Principle Routes of Exposure
Carcinogen listed in Eye Inhalation Skin Ingestion NTP IARC
Signal word
Danger
Hazard statements
H317 May cause an allergic skin reaction H319 Causes serious eye irritation H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H360 May damage fertility and the unborn child
Precautionary statements
P233 Keep container tightly closed P261 Avoid breathing dust/fume/gas/mist/vapors/spray P270 Do not eat, drink or smoke when using this product P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P362 +364 Take off contaminated clothing and wash before reuse P301 + P314 IF SWALLOWED: Get Medical advice/attention if you feel unwell P302 +P352 IF ON SKIN: Wash with plenty of soap and water P304 + 341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing P305 + 351 IF IN EYES: Rinse continuously with water for several minutes (15 mins) -----------------------------------------------------------------------------------------------------------------------------------------------------------------
Potential health effects
Eye Contact: Contact with material at room temperature or fume from material at typical re-flow temperatures over 100°C may cause severe eye irritation. Ingestion: This product contains metal alloy powders and organic chemicals. May be harmful if swallowed. Inhalation: Vapors or fumes from this material at typical re-flow temperatures over 100°C may cause local irritation to the respiratory system. May be harmful if inhaled. Rosin may cause occupational asthma. Skin Contact: May cause skin irritation or dermatitis. Rosin may cause skin sensitization. Chronic: SILVER: Chronic skin contact or ingestion of silver powder, salts or fume can result in a condition known as Argyria, a condition with bluish pigmentation of the skin and eyes. TIN: Has been shown to increase incidence of sarcoma in animal tests. COPPER: Overexposure to fumes of copper may cause metal fume fever (chills, muscle aches, nausea, fever; dry throat, cough, weakness, lassitude); metallic or sweet taste; discoloration of skin and hair.
2.1 Classification of the substance or mixture
Classification: Skin sensitizer-Category 1B Respiratory sensitizer-Category 1B Eye irritation -Category 2A Reproductive Toxicity- Category 1B
