Stay-Silv White Brazing Flux

Hazard statements (CLP)

H302, H311, H361

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace. Hazard Classification

Health hazards

Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Acute toxicity (Inhalation - mist) Reproductive toxicity Category 3 dust and Category 3 Category 2

Signal word

Danger

Hazard statements

Toxic in contact with skin or if inhaled. Harmful if swallowed. Suspected of damaging fertility or the unborn child.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/ protective clothing/ eye protection/ face protection. Use personal protective equipment as required.

Response

IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. Wash contaminated clothing before reuse. Take off immediately all contaminated clothing. Call a POISON CENTER or doctor/ physician if you feel unwell. Specific measures (see supplemental first aid instructions on this label). IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/ physician. IF exposed or concerned: Get medical advice/attention.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.

Other hazards which do not result in classification

Heat rays (infrared radiation) from flame or hot metal can injure eyes. Overexposure to brazing fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Hydrogen fluoride, a possible decomposition product, is extremely corrosive and a poison by all routes of entry. Hydrogen fluoride can penetrate the skin and produce burns, which may not be immediately painful or visible; the burns impact the lower layers of skin and bone tissue. Hydrogen fluoride exposures involving 20 percent of the body or more can be fatal through systemic fluoride poisoning. Chemical Identity Carbon dioxide CAS-No. 124-38-9 Carbon monoxide Nitrogen dioxide Ozone 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 3 Acute toxicity (Inhalation - dust and Category 3 mist) Reproductive toxicity