Stay Clean Paste Soldering Flux

Hazard statements (CLP)

H302, H314, H373, H410

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace. Hazard Classification

Health hazards

Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1B Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 2 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 1

Environmental hazards

Chronic hazards to the aquatic Category 1

Signal word

Danger

Hazard statements

Harmful if swallowed. Causes severe skin burns and eye damage. May cause damage to organs Kidney through prolonged or repeated exposure. Very toxic to aquatic life with long lasting effects.

Prevention

Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF SWALLOWED: Call a POISON CENTRE/doctor/… if you feel unwell. Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. Specific treatment (see on this label). Wash contaminated clothing before reuse. Collect spillage.

Storage

Store locked up.

Disposal

Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

Other hazards which do not result in classification

Overexposure to fumes and gases from the solder and/or flux material can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical Identity Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1B Serious Eye Damage/Eye Irritation Category 1 Specific Target Organ Toxicity - Category 2 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 1 environment Chronic hazards to the aquatic Category 1 environment